PDA

View Full Version : 4WD rear shocks



JDM VANMAN
02-23-2015, 06:40 PM
I know that the OE rear shocks are NLA, but I was wondering which OE type shocks are used for the rear with coil springs. I tried the search function but haven't come up with much as far as after market OE style that's being used.

I've come up with 2 different type of KYB rear shocks so far-


KYB -343140-excel-g-shock-absorber
these are readily available

KYB -kg4644a-gas-a-just-shock-absorber
these are out of stock on the KYB website

I have the front OEM shocks I just got from Toyota but just trying to figure out which rear shocks everyone else has had good experience with.

Thank you for your input :thmbup:

timsrv
02-23-2015, 11:52 PM
Best shock length will vary depending on whether you have stock ride height or if it's been lifted. If lifted, knowing how much will be helpful in determining length. Tim

JDM VANMAN
02-24-2015, 12:10 AM
I'm trying to keep it all stock, I'm pretty sure there hasn't been any modifications done to the suspension, but to be sure I'll have it looked at next time I take it in not unless there's some specific markings on the OEM shocks that I can look at myself.

Thank you Tim:thmbup:

timsrv
02-24-2015, 01:50 AM
The 2 you mention are both well suited for stock ride height. The 343140 is a GR2 shock and the kg4644a is a Gas-a-just. Gas-a-Just shocks are mono-tube and the GR2 is a twin tube design. Mono-tube is a superior design, so IMO these would work better (if you can find them). They will also be more expensive. Tim

timsrv
02-24-2015, 01:54 AM
http://www.ebay.com/itm/KYB-KG4644A-Rear-Mono-Tube-Gas-Pressurized-/180821722493?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a19d0857d&vxp=mtr

JDM VANMAN
02-24-2015, 08:08 AM
Nice thank you Tim that's the confirmation I was looking for, thank you sharing the link. I think I'll go with the KYB KG4644A's

thank you!!:thmbup:

JDM VANMAN
02-26-2015, 12:05 AM
Niiiiice, I ordered them this morning at 500am and got the confirmation at 600am that they were being shipped out. They should be here next week, I'll give an update when they get here.

JDM VANMAN
05-09-2015, 10:13 PM
I got the KYB's awhile ago along with OEM front shocks. The parts guy told me there were only 4 left (front) and after that they would be NLA. Check it out-

EZHIKER
12-07-2015, 08:13 AM
Does anybody remember which rear Tacoma Shocks works best with the Mr. Gasket spacers? Or maybe point me to the thread?
Thanks

timsrv
12-07-2015, 03:37 PM
I typed "Tacoma Shocks" in the search box and this popped-up: http://www.toyotavantech.com/forum/showthread.php?1930-30-quot-tires-and-power

Good luck verifying part number though. I scanned the 1st page and didn't find any obvious part number verification. Good luck. Tim

Jlhollowx13
12-15-2015, 04:48 PM
I have a set of bilstiens I have yet to install, I can get a part number off themy if you need it still. Can't confirm they will work but came from a van guy that said they were the ones

toyota30
02-14-2016, 03:43 PM
I had purchased rear shock extenders from Toytec and they worked great. They have them in 10 x 1.50 and 10 x 1.25. $19 for 2. I purchased kyb rear shocks and added the 10 x 1.25 extenders and they are great. I also purchased 2" 96-02 4runner rear coil spacers and they worked great as well. I feel a steel or aluminum spacer is much safer than 2 rubber spacers, especially one on top AND bottom.

cpginkpt
08-22-2019, 07:31 AM
Looking for rear shock part # recommendations. I like the look of the Bilsteins shown in the Front Shock thread.

Mine has a 2" lift . -pics with current shocks below.

When I google the part # on current shocks (48530 ad051) I get no hits except used. Looking or new replacement or better.

Carbonized
08-22-2019, 01:07 PM
You will need to mod the bottom bushing slightly. Google search this site for more.
9201

cpginkpt
08-22-2019, 01:53 PM
got it. 24-186056 must be the replacement part number (?) When I use advanced search I only get 1 hit which shows a spring mod as well.. Hmm.

Carbonized
08-22-2019, 02:49 PM
These are replacement parts for the Tacoma. They will fit fine without mod on a lifted Van. It is the front one (Dacota's) that need some adjustment, My bad!
Google " lift kit ToyataVanTech" there is a lot more info on this site or use "tags" in the advance search, Gwen just spent a huge amount of time organizing all that, it works.

cpginkpt
08-22-2019, 03:10 PM
Yes I read through that one a couple times - solid.

Just ordered - thanks!

cusco-awd
10-25-2019, 07:46 AM
Whats the OEM app for the Bilstiens? Tacoma of some sort?