Ian R.
07-06-2016, 11:42 AM
The transfer case will not let me shift from 2H to 4H while moving. The engine was recently taken out and put back in.
I wander if the linkage was accidentally adjusted.
I recently changed to fluid with Valvoline SAE 75w-90 Gear Oil With Limited slip, it says it meets GL5 and GL4 (possible problem incorrect fluid?). I did not test shifting from 2H to 4H while moving after the engine was reinstalled and before the oil change. So, I am not sure if this is the root of the problem.
The transfer case lets me shift from 2h->4H->4L easily while at a stop. But it grands when I try to shift from 2H -> 4H while on the move.
Any ideas? I read through the repair manual, but it does not have a trouble shooting section for TC shift grinding.
I wander if the linkage was accidentally adjusted.
I recently changed to fluid with Valvoline SAE 75w-90 Gear Oil With Limited slip, it says it meets GL5 and GL4 (possible problem incorrect fluid?). I did not test shifting from 2H to 4H while moving after the engine was reinstalled and before the oil change. So, I am not sure if this is the root of the problem.
The transfer case lets me shift from 2h->4H->4L easily while at a stop. But it grands when I try to shift from 2H -> 4H while on the move.
Any ideas? I read through the repair manual, but it does not have a trouble shooting section for TC shift grinding.