2wd radiator and shroud, 2wd manual tranny. other parts to come

[djshimon]

200$ for the manual 2wd tranny and driveshaft with 182,xxx miles(skateboard not included). 100$ for rad and shroud. Located in Portland, Or.
Car was totaled from a drunk driver and ran before the accident. I bought it from a friend for a parts vehicle. You can see the van i pulled it from.
Pickup only.
423342344235

[timsrv]

Do you also have the shifter, cables, and the clutch pedal parts?

[djshimon]

I thought so but I just went and checked and there's only one cable(first and third picture)...can't remember if there should be two?:doh:All the clutch stuff is still there. Small chance the p.o. took one of the cables?
All I did was disconnect the transmission and take it out. I was pretty careful on the removal not to cut/break anything.
4239423642374238

[ratatouille]

I was going to say I'll take it but skateboard wasn't included....what other parts you fixin' to offer you think?

[Reinhardtauto]

I NEED that fan shroud. Only thing is, im located in boise and cant drive long distances until i have a fan shroud :pissed: haha.honestly though if youd consider shipping it ill make it worth your while. Just name your price

[djshimon]

So far Tim has spoken for the shroud-if he changes his mind it's yours(maybe pm him?). He did mention they are usually 2 pieces and I only have the big piece you see in the picture. You could always go the route of electric fans and custom shroud?
I'll have a dash in pretty good condition and gauge cluster and a/c controls(although I haven't looked to see if the spider piece is broken).
Some more miscellaneous pieces-you looking for anything in particular?

[Reinhardtauto]

If you have any of these i would be very interested; drivers side radio mount, dash pad, pillar handles, headlight bracket, and there are these weird tiny things that hold the vents in place allowing them to swivvel, i need a few of them
My van was parted out when i got it, i rebuilt the 4ye and fixed the rust, but finding parts is the hard part haha.

[pinkgrips236]

Hey Reinhardt

I have a good condition 2WD fan shroud. DM me if you'd like it!

[djshimon]

I have a dash pad that's dark grey.
How many headlight holders?
Maybe the vent swivel things.
You should probably go with pinkgrips on the shroud as I'm holding it for Tim.

[timsrv]

Yeah, get your own damn shroud :LOL2:.

Just kidding......I just sent you both PM's. Tim

[Reinhardtauto]

I need 1 head light holder
Dark grey is perfect!
Whats the word on the radio brackets?

[Canoed_son]

I realize I am late to this thread, but is the radiator still available? I am DEFINITELY interested. I am also in Portland, OR....let me know!

[timsrv]

The Sherwood Pick-n-Pull just got an 84 van in stock 4 days ago. Being that fresh I'd say chances are good it still has the shroud. Good luck. Tim

[djshimon]

I'm going to try to delete this thread-radiator and tranny and shroud are all gone.
Thanks.

[Canoed_son]

The Sherwood Pick-n-Pull just got an 84 van in stock 4 days ago. Being that fresh I'd say chances are good it still has the shroud. Good luck. Tim Dang, thanks for the heads up! Are you in the Portland area? You are certainly on top of your stuff! Thanks Tim!

[timsrv]

Dang, thanks for the heads up! Are you in the Portland area? You are certainly on top of your stuff! Thanks Tim!

I'm a few miles north in WA state, but I have pick-n-pull inventory bookmarked in my computer. Here's a link: http://www.picknpull.com/check_inventory.aspx?Address=98674&Lat=45.925618&Lng=-122.698569&Make=Toyota&Model=Van&Distance=50

[Canoed_son]

I'm a few miles north in WA state, but I have pick-n-pull inventory bookmarked in my computer. Here's a link: http://www.picknpull.com/check_inventory.aspx?Address=98674&Lat=45.925618&Lng=-122.698569&Make=Toyota&Model=Van&Distance=50 WOW! Great, thanks for the link Tim...I will have to go check out that van soon.

[lowigi]

Hi Folks. I'm new to this group, and really appreciate the knowledge here. I have an '85 2wd that has a melted fuse panel - so I'm looking for the fuse panel/box, and the connectors or harness behind it. Do you have one from your parts van? Does anybody have such a thing they'd sell??? Also, anyone know if other years would work in an '85? I wouldn't quite trade my first-born for one, but it's worth a good bit to me to get "Kermit" back on the road. Thanks, Lois.

[djshimon]

I have the fuse panel but it has one burnt terminal -i think it's the tail light but not totally sure. Also unsure there might be some other corrosion on the panel. And it's a 1986 so not sure it'll work. You can have it if you want it. I can get you a picture tomorrow.
Lemme know.
Aaron

[lowigi]

I have the fuse panel but it has one burnt terminal -i think it's the tail light but not totally sure. Also unsure there might be some other corrosion on the panel. And it's a 1986 so not sure it'll work. You can have it if you want it. I can get you a picture tomorrow.
Lemme know.
Aaron

Hey Aaron

thanks! I'll do some homework to see if I can use an '86 panel. I'd love a picture, and will let you know what I learn. The corrosion on yours might be a problem, as I think that's why mine started shorting

Lois

[djshimon]

4721
I'm having a tough time attaching the front picture. If you pm me your phone # I can text it to you
Actually doesn't look corroded. I don't know what that burned one is though.
aaron

[timsrv]

That particular spade connection is for the HVAC fan blower motor. It's a common failed spot on these vans. I've had 3 fuse boxes so far that developed this problem. The last time it happened I removed that circuit from the fuse box and wired it through an external in-line fuse and a Bosch relay. It's been working flawlessly since then. Tim

[lowigi]

Thank you Tim - a great suggestion, and I think the blower might have been the source of the initial problem on my toasted panel.

Do you know if an '86 fuse panel and connectors would fit into an '85?

this site gives me hope that I can keep my van rolling!

Lois

[timsrv]

I only have 86 - 89 vans and haven't done much work on the earlier ones....therefore I know very little about them. Much is the same, but some subtle things are different. Perhaps somebody with an earlier van might know and share. Tim

[lowigi]

Thanks to JDM Vanman for this photo from another thread. If you still have the fuse box and relays, Aaron, I'd like to try them in my 85, as I've had no luck finding another 85. Any chance that you also have any of the wiring harness and connectors shown below as well? Name your price, and we'll work out shipping. THanks!

Also, if ANYONE has an 85 fuse panel and connectors to sell, please shout out.
http://www.toyotavantech.com/forum/attachment.php?attachmentid=2431&stc=1&d=1431228068