View Full Version : Cooling system pressure
Yodageek
11-08-2018, 12:22 AM
I am not getting any pressure in my cooling system. The van warms up properly and the heat works. No overheating but no pressure building on the systrm. I just did the inline filter and black flake mod and I don't seem to be loosing any coolant. I'm confused. Any ideas?
cb97alltrac
01-15-2019, 09:58 PM
Have you replaced the cap? The same black flakes that result in the high idle when cold also obstruct the reservoir outlet channels at the small black hoses. I would pull the reservoir and clean the outlets and see if that helps.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.