PDA

View Full Version : Parting out 87 Van



erik
04-21-2019, 06:20 PM
Hi all,

I have an 87 Van (Passenger) that has been a donor of several parts to my primary van. Our van is almost finished and it is time to get the remaining parts to good homes. If anyone is interested in a part, please let me know and we can make arrangements if it is still available. Thanks!

Erik

882488258826

OliGT90
04-22-2019, 01:40 AM
Do you still have plastic panel that inserts into the door that sits below sliding door windows? And uncracked center console piece?

SoORYotas
04-22-2019, 07:57 AM
PM sent. . . . .

JDM VANMAN
04-22-2019, 09:16 AM
PM sent

JDM

daviddoctorrose
04-23-2019, 12:13 PM
PM sent

erik
04-23-2019, 02:19 PM
Do you still have plastic panel that inserts into the door that sits below sliding door windows? And uncracked center console piece?

Are these what you are looking for?

88278828

erik
04-23-2019, 02:32 PM
Better view of the front wiper arms:
8829

Passenger side arm rest:
88308831

OliGT90
04-23-2019, 03:13 PM
Yes, I’m so glad you have them just the top part of the panel for sliding door and also center panel. I sent you a dm. I’m interested in both parts

erik
04-23-2019, 04:38 PM
Better photos of sides:
88328833

MagicMan
04-24-2019, 04:55 AM
I am in search of tail lights and windshield trim

AstoriaLump
04-24-2019, 11:27 AM
I’m going to have to look over my van and see what I may need, but off the top of my head I know a few things.

Window regulators for both driver and passenger side.

The little plastic door handle for the interior of the front doors.

It’s probably prohibitively expensive to ship, but I would love to get the driver side interior door panel as well. Both the top and bottom parts. I’d take the passenger side too while I’m at it. That is, if they’re in decent shape.

I’m also looking for the combination switch that has the turn signal, lights, wipers control on it. 8834

erik
04-24-2019, 04:12 PM
I am in search of tail lights and windshield trim

Hi MagicMan,

Unfortunately tail lights are sold and the windshield trim is in rather rough shape, I don't think you would want it.

Erik

erik
04-24-2019, 04:16 PM
I’m going to have to look over my van and see what I may need, but off the top of my head I know a few things.

Window regulators for both driver and passenger side.

The little plastic door handle for the interior of the front doors.

It’s probably prohibitively expensive to ship, but I would love to get the driver side interior door panel as well. Both the top and bottom parts. I’d take the passenger side too while I’m at it. That is, if they’re in decent shape.

I’m also looking for the combination switch that has the turn signal, lights, wipers control on it. 8834

Is there any chance you will be in the SF Bay area in the next few weeks? I'd love to get you all those parts but the larger panels might be too expensive to ship.

I can definitely get you the interior door handles and the combination switch. Not sure how to remove the window regulators but if you know how I can do it. They seem pretty embedded in the doors!

BartMaster1234
04-25-2019, 01:29 AM
Hey, I'm local to you.

Interested in the HVAC control panel with buttons and the trim around the shifter:

8843

minidonks1
04-25-2019, 08:56 AM
I would be interested in inside door panels, rear door lock & mechanism, arm rests, front dome lights and the console if they have not already been sold. I will be glad to pay whatever shipping is.

erik
04-25-2019, 03:47 PM
Hey BartMaster1234!

You can definitely have the trim around the shifter. HVAC panel was used in my build sorry!

Erik

BartMaster1234
04-26-2019, 02:45 AM
Hey BartMaster1234!

You can definitely have the trim around the shifter. HVAC panel was used in my build sorry!

Erik

Damn that HVAC panel is elusive. The Toyota Pickup one is different, as is the 4Runner, and the Cressida which are the closest matches. The Cressida is almost identical except some things are routed differently.

The one we have is held together with metal strapping and wood glue.

When days and times are you free? I'm local to you.

TLett
04-26-2019, 01:44 PM
I could use the read hatch, sliding door, and rear bench seat if they're in good condition. And the strap that holds the seat in place to get you under the hood. I imagine slapping them on a pallet and freighting to Dallas wouldn't be cheap, but if you're willing, PM me prices shipped and prices picked up? The colors are a match to mine, so if I get my headgasket done in the next few weekends, I think I could justify a road trip/campout/parts pickup. And if they didn't go with the regulators, I could use the driver side window switch (whole thing).

swamptony
04-29-2019, 03:45 PM
Hi Erik,

Can you post or PM me some photos of the front seat and passenger seat? I'm in Sacramento area, and willing to come pick them up if they're in good condition.

Thanks

VanDown
04-30-2019, 12:33 PM
PM sent!

swamptony
04-30-2019, 01:04 PM
PM sent!

Hey Just checked my PMs and noticed they were full! Send it again when you get a chance and this time i'll get it :)

Thanks!

VanDown
04-30-2019, 01:24 PM
Hey Just checked my PMs and noticed they were full! Send it again when you get a chance and this time i'll get it :)

Thanks!

Sorry for causing confusion - I'm not the original poster; I sent a pm TO him, not you.

swamptony
04-30-2019, 02:20 PM
Sorry for causing confusion - I'm not the original poster; I sent a pm TO him, not you.

Oh haha, i'm bad at reading, sorry! :LOL2:

jr5446
04-30-2019, 08:28 PM
Hi,do you still the roofs (moon and rear sun), sunroof switch assembly, center console and both door windws swithes. If you have all or any of these please reply. Thanks. jr5446

SoORYotas
05-01-2019, 10:29 AM
Hi,do you still the roofs (moon and rear sun), sunroof switch assembly, center console and both door windws swithes. If you have all or any of these please reply. Thanks. jr5446

Passenger door window switch and the driver door Passenger door window switch can be replaced with parts from Toyota Cressida. Switch Doctor Decatur GA Item Number 370542649817 about $9.00 each if I remember properly. They are a direct match, just peel the switch out of the mounting housing and replace. Cannot help with the Drivers window switch - I have never found a replacement.

SoORYotas

jmac333
05-07-2019, 04:25 AM
Hey, i am in Berkeley and would love if i could get the outside handle for the side sliding door. I have an identical van except 5 speed. I would actually be willing to take the whole sliding side door now that i think about it. If u have the FPR and/or cold start switch I'm looking for those as well.
Jesse

Mackd
05-07-2019, 08:30 AM
I am not sure if TLett from Dallas meant the rear hatch or another part, but if he DID NOT mean the rear hatch with the window I would be interested. I am in Los Angeles and would find a way to get it hear. TLett, if you did mean the rear hatch my apologies - not trying to invade your claim.

AstoriaLump
05-16-2019, 01:50 PM
I’m not sure if this van has gone to the scrap yard or not yet, but I’m still interested in the window regulators and I can get instructions for removing them if you need. I dropped off the forum for a bit because I got busy with work so maybe I missed my chance.

JDM VANMAN
05-16-2019, 05:28 PM
I’m not sure if this van has gone to the scrap yard or not yet, but I’m still interested in the window regulators and I can get instructions for removing them if you need. I dropped off the forum for a bit because I got busy with work so maybe I missed my chance.

Not to go off topic but if you have instructions and photos on how to remove/service the window regulators that would be a great addition to the Technical Section of the forum:thmbup:

”if you post it ... I can learn it”:yes:

Thank you

JDM

geo
05-16-2019, 11:01 PM
Hi Erik, are front door panels available? sliding door handle for out side? also looking for fog lamps, thanks!

irisr415
05-17-2019, 12:26 PM
Hi do you have the trunk door handle with the metal attachment?

erik
05-22-2019, 08:02 PM
Damn that HVAC panel is elusive. The Toyota Pickup one is different, as is the 4Runner, and the Cressida which are the closest matches. The Cressida is almost identical except some things are routed differently.

The one we have is held together with metal strapping and wood glue.

When days and times are you free? I'm local to you.

Hey BartMaster1234,

I've got the trim around the shifter pulled. Would you say $20 sounds fair? Let me know when you're free to meet me in either Mountain View or San Jose.

Thanks,
Erik

erik
05-22-2019, 08:05 PM
I could use the read hatch, sliding door, and rear bench seat if they're in good condition. And the strap that holds the seat in place to get you under the hood. I imagine slapping them on a pallet and freighting to Dallas wouldn't be cheap, but if you're willing, PM me prices shipped and prices picked up? The colors are a match to mine, so if I get my headgasket done in the next few weekends, I think I could justify a road trip/campout/parts pickup. And if they didn't go with the regulators, I could use the driver side window switch (whole thing).

Hi TLett,

I have the hatch, sliding door, and rear bench seat. All are in acceptable shape, but the locks have been pulled from the doors for my build/sold. I'll send you a PM with more info.

erik
05-22-2019, 08:06 PM
Hi Erik,

Can you post or PM me some photos of the front seat and passenger seat? I'm in Sacramento area, and willing to come pick them up if they're in good condition.

Thanks

Hi SwampTony,

I'll get you those photos soon. They're not in pristine shape and the passenger arm rest has been sold. Let me know what you think.

erik
05-22-2019, 08:08 PM
Hey, i am in Berkeley and would love if i could get the outside handle for the side sliding door. I have an identical van except 5 speed. I would actually be willing to take the whole sliding side door now that i think about it. If u have the FPR and/or cold start switch I'm looking for those as well.
Jesse

Hi Jesse,

I can definitely do the fuel pressure regulator and the cold start switch. Someone ahead of you may want the sliding door but if not it's yours. I'll send you a PM with more details

erik
05-22-2019, 08:09 PM
I am not sure if TLett from Dallas meant the rear hatch or another part, but if he DID NOT mean the rear hatch with the window I would be interested. I am in Los Angeles and would find a way to get it hear. TLett, if you did mean the rear hatch my apologies - not trying to invade your claim.

Hi Mackd,

If TLett doesn't want the rear hatch, it's yours. Note that the locking mechanism was removed and used in my build.

erik
05-22-2019, 08:10 PM
I’m not sure if this van has gone to the scrap yard or not yet, but I’m still interested in the window regulators and I can get instructions for removing them if you need. I dropped off the forum for a bit because I got busy with work so maybe I missed my chance.

Hi AstoriaLump,

If you can make a post on removing them they're yours still! I got busy with work as well so I completely understand

Carbonized
05-23-2019, 02:30 PM
Hi AstoriaLump,

If you can make a post on removing them they're yours still! I got busy with work as well so I completely understand




https://www.toyotavantech.com/forum/showthread.php?6695-Window-Regulator-Removal Pay attention to post # 8

Squidvan
05-25-2019, 05:22 PM
Interested in the egr diaghram if the van passed smog when parked

MagicMan
05-29-2019, 03:00 PM
ID LIKE TO BUY THE FRONT WINDSHIELD MOULDING

ronnoc11217
05-31-2019, 02:50 PM
Are the side lights still available?

AstoriaLump
06-03-2019, 12:13 PM
https://www.toyotavantech.com/forum/showthread.php?6695-Window-Regulator-Removal Pay attention to post # 8

Thanks for pointing us in the right direction for how to get the regulator out! I was about to take a look at my van for how to do it but this should do the trick. Definitely look at post #8 because that guy had a way easier method for removing it than the original poster. I’m not sure if the power window regulator is much different as far as removal goes, but I wouldn’t think it would be all that different of a process.

Erik, let me know if you run into any issues and I’ll see what I can do to help.

gwalzer
06-10-2019, 12:23 AM
Is the rear emblem still up for grabs? Thanks!

outlawmws
06-15-2019, 11:47 PM
I'm interested in several things:

Windshield?

Sliding Door?

Interior Grab handle sin the back?

Drivers long seat belt?

Visors?

Owners manual?

I'm Fairly local so can come Pick up

cpginkpt
06-16-2019, 05:25 AM
Sounds like you sold the guts of the center console around the shifter (?) - I am looking for the rest of the console and have shifter trim already so that would be a good fit.

please lmk either way ;) thx!

EZHIKER
06-16-2019, 08:20 PM
Hoping for a glove box?
Thanks
Sam

Teampischke
06-22-2019, 02:53 PM
Do you still have a driver side tail light assembly?

YUKYBOY
07-03-2019, 01:11 AM
would love drivers side door panel if available and good shape. ship to LA or can pick up in bay next month.
Thanks!

MartyVanFly
07-03-2019, 01:52 PM
Shot in the dark, Front dash (not instrument cluster)?

Thanks!

jenvinh
07-06-2019, 07:35 PM
Are the corner light assemblies still available?

507Grant
07-07-2019, 12:30 PM
Hi, am looking for 87 van cluster, do you still have one?

outlawmws
07-07-2019, 12:47 PM
Eric hasn't responded tot he thread since 5/22, and hasn't been on the forum since 6/23; I didn't get any response to a PM.:?:

I feel like this guy right now...:wall:

stuartgipson
07-22-2019, 02:29 AM
Hi there,
I'm looking for the plastic exterior trim/moulding piece that goes right below the fuel filler door on LE models. Is it still available. Thank you, Stuart

RayVan
07-22-2019, 03:21 AM
Will you part out the window regulator on the drivers side?

Willotquentin
07-30-2019, 02:38 AM
hi, do you still have some parts of your van 87 by any chance? thanks

michaels86
08-09-2019, 11:46 AM
I need passenger door window. PM sent.

gwalzer
08-14-2019, 11:05 AM
Looking for the right hand taillights. Send help.

MartyVanFly
08-14-2019, 07:28 PM
Got a rear view mirror and dome light? Thanks!

PrecisionDriven
08-18-2019, 05:05 PM
I need a complete rear hatch door for my 87 LE passenger van. Is that available?

Norman
08-20-2019, 07:54 PM
Hey, I'm local to you.

Interested in the HVAC control panel with buttons and the trim around the shifter:

8843
Ineed this and fuse box 😟

itskmill06
08-26-2019, 03:31 PM
I need the rear interior cover around the engine compartment... the passenger side exterior door trim... and the clip that holds the engine cover up (if that's available). Shipped to 59601/Montana please! I'll send you a message! Just a few things to make this new van i got feel a little more complete
9229
9230
9231

Willotquentin
09-08-2019, 04:13 AM
Hi, am looking for 87 van cluster, do you still have one?

hi i have one if you want

Flecker
09-08-2019, 03:12 PM
If you have the cornering lens drivers side in good shape I might be interested!

Just pm me and let me know how much. :)

Flecker
09-09-2019, 11:32 PM
Got your pm, I will pass for now. Thanks.

PearlVan
10-22-2019, 01:10 AM
I am local, I need a whole rear axle. Any chance you have the van still and are willing to part with the axle?

cebowman
10-24-2019, 07:14 PM
Hi!

I'm interested in the 2 rear windows. Do you have any experience with removing them yourself or do you know a good local guy who can?
Thanks!
Cali

RutRoe
10-26-2019, 09:37 PM
Hey, do you still have the rear wiper arm?

digitalgsmp
11-07-2019, 02:08 PM
Hi, I need the front bumper and driver side quarter panel, driver side headlight case. Also the fuse or maybe the whole rear a/c fan. and really a bunch of other stuff, are you still parting out this van?

At112
11-07-2019, 06:26 PM
Hey everybody im looking to buy a “center arm” its a v shaped piece that connects to the relay rod and the pitman arm.
Do you have this for sale?
thank you,
alex

JDM VANMAN
11-08-2019, 12:42 AM
Hey everybody im looking to buy a “center arm” its a v shaped piece that connects to the relay rod and the pitman arm.
Do you have this for sale?
thank you,
alex


Corrrect me if I’m wrong but I think the pitman arm is only on the 84-85 van wagon and the later years the front suspension changed?

JDM

At112
11-08-2019, 10:12 AM
The center arm is only on the ‘84 and ’85 models ‘86 went to rack and pinion.
attached is a diagram with labels.

At112
11-08-2019, 10:52 AM
Also I mistakenly wrote before that the center arm connects to the relay rod and the pitman arm. The center arm connect to the relay rod and the DRAG LINK not the pitman arm
alex

507Grant
02-12-2020, 07:45 PM
Do you still have the Electric Control Unit.

MyToy
02-21-2020, 04:52 AM
In need of the front exhaust pipe that connects to the exhaust manifold.

Do you still have that? Need asap

MT

Jacobnettleton
06-09-2020, 10:53 PM
hi i was wondering if you had the last piece to my puzzle...a rack and pinion?
call or text 5039845632
email: jacob.nettleton2000@gmail.com

BradW
07-02-2020, 08:26 AM
I am in search of middle and rear row seats, do you have some?

Diy2k
07-05-2020, 08:19 PM
Where is the van located ?

Hildago
07-21-2020, 12:11 AM
Wow ! can't get any closer, I am in PA also. I have a 1987, 4wd model. It looks like you have a rwdrive, I don't know whether the " brains " or the computers are the same or not ???
Also, I could be interested in the rear heater core. I have never tried taking it out the rear heater core ( but I assume it can be done ), but I believe mine is clogged. It may well be that the frame is the same, and thus they are interchangeable.
My name is Rudy, and you can email me directly if you want, " wild_places2@yahoo.com "
Thanks

ps If I can fix everything else, I might be interested in the tires, but a lower priority.

moonbooties
07-22-2020, 08:23 PM
I realize I'm very late to the game but I'm looking for the right arm of the combination switch (cruise control, wiper fluid arm) and need a new exhaust flange for an '87 if you still have either. Thanks!

jannifiddle
08-15-2020, 02:33 PM
I'd take the front bumper if you still got it!

Mackd
08-15-2020, 03:01 PM
Do you still have:

1. Main window and lock control rail on the drivers side door?
2. My 4x4 has two independent rear middle seats. I need a seat belt receiver. I have the belt, but nothing to click it into on one of my seats. Do you happen to have one or the set?
3. I am also looking for the plastic wall mounted seat belt cover (it covers the mount bolt) for my rear bench seat.

Thanks,
MacD

Diy2k
08-15-2020, 05:04 PM
Macd, what side for the rear seat belt cover ?

Mackd
08-15-2020, 06:32 PM
Passenger side.

Busyboy
08-28-2020, 12:00 AM
How about the quarts clock? Mine went k-putz and shorted. I don't need the trim, just a working clock. Be careful of testing it outside the vehicle. It is polarity sensitive and will short out if hooked up incorrectly. When the clock shorts out, the dome lights won't work and the battery will go dead in a few days. To test the clock for a short, close all the doors & pull the fuse #5 and insert small spade connectors or wires connected to a test light. If it lights up and the clock doesn't, it's bad. Oh... be sure you have the battery connected.

Sshields32
08-31-2020, 03:33 PM
In need a of a speedometer cable!

pacolobo
10-18-2020, 10:46 AM
Looking for the drivers side window regulator. Is this still available? thanks!

RichardBryanBaker
10-23-2020, 06:20 PM
Hi there, I realize your post is over a year old, but I have a RWD 87 cargo van which needs the driver's side cornering light and the driver's side amber turn signal/ parking light . Do you still have these?
Fingers crossed in San Diego County. Thanks, Richard
trickyrickybaker@hotmail.com

Jdelgado
10-26-2020, 10:31 AM
Hi there, I realize your post is over a year old, but I have a RWD 87 cargo van which needs the driver's side cornering light and the driver's side amber turn signal/ parking light . Do you still have these?
Fingers crossed in San Diego County. Thanks, Richard
trickyrickybaker@hotmail.com

https://www.ebay.com/itm/NOS-86-89-TOYOTA-VAN-RH-FRONT-CORNER-LIGHT-ASSEMBLY-TURN-SIGNAL-4X4-CORNERING-87/254556260461?_trkparms=aid%3D111001%26algo%3DREC.S EED%26ao%3D1%26asc%3D20160908105057%26meid%3D7e931 88e05c6400eb3ad800df97bb8e3%26pid%3D100675%26rk%3D 6%26rkt%3D15%26mehot%3Dnone%26sd%3D373274515204%26 itm%3D254556260461%26pmt%3D0%26noa%3D1%26pg%3D2380 057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A1a24fdd4-17a0-11eb-a3b3-eab213401c18%7Cparentrq%3A6587bf1f1750aaecad78e3e2 ffe949e4%7Ciid%3A1


Hope this helps :dance2:

oldvanguy
10-28-2020, 03:12 PM
i need a passenger side power window regulator (not the motor - just the skeletal part/assembly that holds and guides the window). might it still be available?

thanks for any response

pezocar
11-12-2020, 03:07 PM
Looking for bench seats, available?

ShaneMc
11-19-2020, 01:49 PM
I could use a couple of parts if still available. I'm looking for a drivers side front mud flap. Also looking for the LE trim moulding that sits above the right rear wheel.

Cheers!

lawnjovi
11-22-2020, 06:15 PM
Hi erik,
I am looking for 2 front door hinge pins with the bushings in-tact. Do you have any of those left?
Thank you

Paul R.
11-25-2020, 04:45 PM
Hey there!

Can I get both of the front turn signal lamps??

Thanks so much!
Paul