I double checked all my wiring a second time and I really do not think I have a wiring failure in the EFI system. I can wrench around all the wire looms I can see with no loss of conductivity.
But 2 places have said the same ball joint was loose, which worried me. I just don't know what to believe. I don't get any 12-6 wobble when I tested it, but I'm a nobody in these things. I think I...
That's good - I'd be real concerned with ball joints going. You can wiggle at 12-and-6 or - as he probably did - jam a crowbar between the upper part of the ball joint and the knuckle to see if the...
I understand the skepticism for sure. The previous owner did the valve cover seal, distributor is fine, and I've checked everywhere else. I did a very thorough cleaning when I got it, and the oil...
Section Widget
Categories Widget (Show All)
Recent Forum Posts
Re: Rough Hot Idle - 1992 2TZ-FE - The Saga of Njordi
I double checked all my wiring a second time and I really do not think I have a wiring failure in the EFI system. I can wrench around all the wire looms I can see with no loss of conductivity.
Boerderij_Kabouter 03-20-2025, 03:30 PMI...