• TVT Previa Service Manual


    There is no content in this section

  • Recent Forum Posts

    tbuyan

    Re: brake job

    Somewhat off topic, but I just got a pair of front rotors from NAPA. They appear to match the take-offs and bolt on OK, but they severely rub the caliper bracket. Apparently mis-machined, so back...

    tbuyan 06-17-2024, 12:01 PM Go to last post
    Previologist

    Re: brake job

    Good news, my front brakes are fine, so I'm just going to replace the rear pads and rotors. I'm ordering Advics ceramic pads and Centrics rotors. We'll see how those rotors do, they have mostly...

    Previologist 06-17-2024, 10:27 AM Go to last post
    Previologist

    Re: brake job

    It happens with old shoes/pads. I've heard of vintage motorcycles locking up because of the shoes degrading, which is why it concerned me at first. But after some thought i decided the risk with a...

    Previologist 06-16-2024, 10:42 AM Go to last post
    John Kaufmann

    Re: brake job

    Sounds like the right choice. Aside from the crumbling at the end (never seen that), thickness seems more than adequate.

    John Kaufmann 06-16-2024, 08:23 AM Go to last post
    Previologist

    Re: brake job

    I changed my mind. I cleaned up the edges of the parking brake shoes with a file and will leave them alone unless they cause trouble again. If indeed they have.

    The caliper on that side still...

    Previologist 06-15-2024, 07:53 AM Go to last post