I'm an engineer that uses CAD professionally and has a high end printer. SOOOOOO if the gentleman you linked with does not come through with the replacement part or runs into problems, I can help.
If no change in timing with the Check Engine Connector jumped, then it's a bad (or unplugged) TPS, a faulty harness, or a bad ECU. Even with the TPS being new-ish, I would still think that to be the...
Ok so I was finally able to both borrow a timing light and get some time to actually dig into this issue. Timing appears to be ~20° BTDC regardless of whether the "Engine Check Connector" is...
So I did a test drive with the tachometer unplugged and with the ociliscope plugged into the emmisions computer. The tach signal was steady the whole time.
I took an other...
Section Widget
Categories Widget (Show All)
Recent Forum Posts
Re: Wiper blade mount conversion
I'm an engineer that uses CAD professionally and has a high end printer. SOOOOOO if the gentleman you linked with does not come through with the replacement part or runs into problems, I can help.
skyshadow07 06-12-2025, 11:02 AM