• Recent Forum Posts

    originalkwyjibo

    Re: front blower mystery-resistor bypass?

    There are three resistors on the resistor pack each of a different resistance value, one for each of the three lower fan speeds. There is one terminal connected to each of the three low speed outputs...

    originalkwyjibo 09-19-2020, 11:21 PM Go to last post
    Previologist

    Re: front blower mystery-resistor bypass?

    Being 4 terminals at the resistor and me having only half a brain, i would need instructions on how to test the resistor connector for voltage. If there were only 2 that would mean i only have a 50%...

    Previologist 09-19-2020, 11:04 PM Go to last post
    originalkwyjibo

    Re: front blower mystery-resistor bypass?

    This would be a good start. You may find the original wiring in the process.You could also test for voltage at the resistor itself. Unfortunately, figuring out and fixing other people's "repairs" is...

    originalkwyjibo 09-19-2020, 10:49 PM Go to last post
    Previologist

    front blower mystery-resistor bypass?

    normally when the resistor is shot, the front blower will only work on high. My blower only works on high. However, I bought a new resistor and it still only blows on high.

    The previous...

    Previologist 09-19-2020, 09:35 PM Go to last post
    apham8

    Re: Wiper Blade Replacement 1991 Previa

    The ANCOs worked for months without issue. Then the Passenger side wiper blade, the actual rubber wiper portion, would shift within the track to the outer right side edge of the track. It would bunch...

    apham8 09-19-2020, 07:13 PM Go to last post