Brand new OEM drums for 4WD van. Part #42431-28030.
Unobtainium.
280 USD for the pair.
Will ship, located in Toronto.
11389
Type: Posts; User: dom; Keyword(s):
Brand new OEM drums for 4WD van. Part #42431-28030.
Unobtainium.
280 USD for the pair.
Will ship, located in Toronto.
11389
While working on the liftgate/rear hatch, I loosened the screws holding the hatch hinges (the 2 screws on the inside and 2 screws on the "outside" of each hinge). I tightened them again while the...
What's the length and thread of the long vertical bolt on the idler pulley? I remember Tim posting it somewhere but I cant find it for the life of me...
EDIT: GOT IT - M8 x 1.25 x 90
How do I remove the top nut from my rear shocks? I'm referring to the nut that is accessible from inside the van. When I turn it it seem to spin but not get loose. I feel like there a simple solution...
I just got two drums for my 4wd van from my local Toyota dealership. Came from the California distribution centre in 3 days!!! :lol:
Thanks outlaw and JT! I might cut some urethane discs for the springs to sit on instead of reusing the old rubber pads.
Is therear brake proportioning bracket the only mod I have to do in terms...
Question: I'm in the process of lifting my 4WD cargo van. I removed the rear stock spring, and am about to install a Moog CC841 with ~1 pigtail/coil chopped off on each end. Are these the right...
Does anyone know where I can get drums for my 4WD van? I tried rockauto, but they don't have any in stock. I also ordered some off of eBay (R1 Concepts), but they ended up sending me the 2WD drums...
So my rear hatch latch (69350-28011) was "broken", and would not latch the rear hatch shut when I closed/open it it. I tried moving the lever inside the device, but everything was seized together and...
The brackets that hold my front and rear sway bar to the frame/control arms are gone/rusted out. Instead of buying or making replacement brackets and hardware, I'm thinking of just removing both bars...
Thanks, I'll give that a shot.
Here I am secretly hoping someone will say "just cut the bracket and install Tim's custom bracket with a Cs144 alternator" 😉
The long bolt head sheared off when I tried to turn it in order to remove the alternator. Now I have a threaded bolt with no head flush with the alternator bracket hole in the front, and with a...
Is the long bolt on the bottom of the alternator threaded into the engine bracket?
The bolt head on mine sheared right off as I was trying to replace it..
Any ideas on how to get this thing...
That's great news!!
A few questions:
1. How did you mount the rad? Bottom mounts only?
2. What fab was necessary? Just the lower bracket extensions to push the lower brackets out a bit? (I...
Is there a reason why this radiator wouldn't work in an 87 4wd MT van?
https://www.summitracing.com/parts/gri-2-56185-h/overview/
Size seems alright, will need some brackets to fit the stock...