Good Morning folks, thought I'd add some additional photos I took with one of my newer cameras last night :)>::silvervan:
Also, just now I thought "Man, I should've wrapped my external connectors...
Type: Posts; User: 89van; Keyword(s):
Good Morning folks, thought I'd add some additional photos I took with one of my newer cameras last night :)>::silvervan:
Also, just now I thought "Man, I should've wrapped my external connectors...
Right on folks, on with the results of my wiring: Only ran into ONE hiccup; I put the power out wire on the wrong side of the plug on the back of the fusebox :doh:as well as NOT disconnecting the...
Dam it, first image didn't werk. Try again mayhaps??
12559
All quiet on the foglight thread... until now! Got a motivational burst to continue it and boy did I make good progress today. Got the whole wiring (Non-OEM mind you, but my way will work!) system...
I see, so they got into the engine hatch on the driver's side then... bummer!!! Do you have any pics of the damage? Just to scale it, I can see if there's anything I left out relative to the damage...
Yep, it is!
12552
Ouch! Sorry to hear about that, that's a major bummer. How'd they even get in there? From the bottom under the van? I'd assume since I dunno if they were smart enough to open the engine hatch but...
Upon inspection of my headlight relay mount, it seems to be quite melted to my dismay. Similarly, the relay (by random chance, it had the exact same part number as my old one!!! :wnk:) i got from...
Seems like a fitting update for the thread, pardon the necro... Tonight I (with the help of a classmate and the Factory Wiring Diagram) determined the appropriate power flow of the headlight circuit...
Not too sure what you mean by error code 6, here's a manual of the diagnostic codes for elaboration:
...
Location of the fog light relay, underneath your radio area
12503
FSM locations of relays/computers
12504
The blanking plates, quite easy to take out, just worm your hand up and behind and gently...
Relays good, now I'm onto the step of test-wiring everything together (Harbor Freight butt connectors will suffice, I'm planning to tap into the fuse box since it already has the fog light fuse...
According to the part #, it's a multi-use relay for the fog lights, A/C, headlights, tail lights, etc. which is good to know. One of the reasons I was severely confused looking this part up was the...
Alright, after some digging online I found an appropriate diagram for the defogger switch. Interestingly, it doesn't show pins #1 and #2 but it does show it does have a light inside of it as I...
Darn, well I would've thought the 2WDs would've had some too and from the owner's manual it looked like they did have some on either drive choice, but apparently its lumped in with the 4WDs only I...
Seems appropriate being the only thread, that I could find, about the fog lights on our Vans. So I have a functional pair (tested the bulb with a jumper wire, my van doesn't have the connections for...
According to my source, the following part numbers (Between a 1989 Automatic and your 1987 Manual) are what I found different:
1989 Automatic Oil Filter Bracket: 15609-71011
Now for your van's...
Good day folks, apologies for the necro I guess but this seems suitable, so from my understanding either DEX III/DEX IV is suitable as it superseded it. Seems my van lost some ATF from sitting thanks...
I would kill for a wiring diagram to help you, but my best guess is: If it is not in reverse, but they only come on when you turn on the running lights, something is probably crossed on the reverse...
"so I am getting a click on my ac relay, no power to my ac fuse and and strange reading on the power right before my blower motor (42 volts?!)
this all started when my blower motor went out a couple...
Hey folks, just wondering if anyone might be able to confirm something with regarding some parts:
so a few days ago the head (whatever it might be, see picture, the part that you insert your wiper...
Hmm, I haven't heard of this since it rarely rains where I live, but the fuse box is located underneath the glovebox, not behind it since i did take a poke behind once out of curiosity (if you look...
I cross-referenced part numbers and they appear to be different, and the wiper arms themselves seem to look different though. Haven't tried it myself, so maybe someone else whose done some wiper arm...
So, here's the clips and grommet part numbers and pictures for those curious:
For the darker, square metal clips (such as the ones I broke) they are "RETAINER" Part # 67771-20022
12160
For the...
Welp, this morning I made an interesting observation: ALL of my sealed beam units have moisture in them! A handful of days ago I gave my entire fleet a good wash, and that's probably where it came...
actually upon sleeping on what i did yesterday, I think removing the panel with the clips still inside of the panel (such as prying behind the panel around where the clips go into the rubber...
Got the panel off and my side door opening again! :dance1: For anyone else curious how to remove the door panel, it goes a little something like this:
Get some needlenose pliers, a philips head...
Greetings vanfolks!
i come here with an issue ive noticed today. while i was out picking up some cargo, i noticed my sliding door (like everyone else here, outside handle has broke but the inside...
Hmmmm, using what I know, since you have a JDM Van it could be something different than the U.S. Vans I think. My van (base cargo so nothing special besides A/C!) only has the door dash light on when...
Hey tim, finally getting around to doing this flush today. Found the radiator drain plug and let it empty itself. I believe I found the block drainplug in that not-so-easy to access area behind the...
Is flushing out the coolant easy enough to do in my driveway? I know someone said there was a drain on the bottom right? corner of the radiator, but from the block I'm not so sure where they are...
Apologies in advance for necromancying this thread, but I've recently got a concern about my cooling system, and about time too. Today I was just adding oil per usual, added too much so I'll have to...
So, at a bit of a dead end here, want to check the ground on the circuit as someone said, the headlight harness appears to run up into the dashboard somewhere unknown, just kinda at a dead end here...
Got a bit caught up in relaxing over the weekend, heres my original fuse's blown condition
1191311914
One of the pins definetly burnt good. Think it might've been the bottom one I'll double check...
UPDATES:
-Dropped the front bumper successfully after removing a couple too many bolts on some other bumper pieces (The metal trim piece underneath the front, some screws on the back for the bumper...
Thanks man, this helped me take off mine!!!
Do what he said and you should be good to go for anyone in the future!:dance2:
To add onto this, if you can pull the key out while its in any other position without using the LOCK button above it, don't forget about it. Very easy to do, and since mines worn smooth the horrid...
Thanks Tim, gonna be taking my van to the auto shop tomorrow so it really helps i got a reply. Without it i'd be stumped lol, also should inspect up front since I saw one of the bumper mounts? I dont...
Gonna bring my van to a local guy from the word of mouth who is really good with electricals supposedly, maybe I'll find the nail on the head thru him :silvervan:
Okay, got one of the cornering lamps off, and i nearly got the plastic headlight trim ring out but theres one's screw near the bumper that seems impossible to get to, do I also have to drop the...
Thank you oh so much for this write up, the visualization of the peg at a 45 degree angle aimed at the drivers seat helped out a lot. Was a bit stubborn but guess what!11908
Got it with the peg out...
Okay, I believe i MAY have found one culprit for my no-lights issue...
When I originally first discovered and bought this van, the passenger's side Hi-Beam lens was broken, but the bulb inside...
Holy smokes :drool: whoever buys that next is gonna have a deal of the century!!!
someone else already provided a good answer for the drain plug, but if you're lazy, or strapped for tools like I was, you can also siphon out the gas with a hand pump I.E. one from AutoZone. I'll...
Yep, that's very helpful! Was trying to pull the AM1 fuse by mistake, headlight one was just to the left of it all this time :LOL2: Speaking of which, I can fool around with my "new" analog meter, a...
Also forgot to mention, the symptoms now that i'm having compared to earlier in the year are as follows:
Headlight relay clicks when on the 3rd position (Lights)
Hi-Beams relay does NOT click...
Welp looks like I also have to drag myself here too from a same issue with the headlights/hi-beams and including my horn too which works intermittently (No headlight, no highbeams (no blue indicator...
I believe that is "WEATHERSTRIP, FRONT DOOR GLASS, OUTER" part # 68160-87001. From my quick glances online, looks NLA as usual but it doesn't hurt to call around to double-check :thmbup:
Thanks for the info tim!
Good mechanic of mine replaced the HoD with that bulk Gates hose and generic bulk hose clamps; VCG and a Coolant Flush was also done in addition to some cooling hoses too :)...
Hey tim, just wanted to double check something:
the hose of death behind the block that leaks onto the bell housing, is there another part # for it out there? the one on page 1 doesn't bring in...