Search:

Thank you, I used the Gates website VIN Decoder to find all the part numbers needed as well. I decided to change all three belts since I would be in there.

Amazon's fitment app is hit or miss and...

I am trying to figure out the part numbers for the appropriate drive belts for my 1995 Previa supercharged. I have had bad luck on Amazon with their "SEE IF IT FITS" system.

Anyone know what the...

yes, I am driving the van with my condition. No real issues other than bogging and stalling when the A/C is engaged at a stop.

The OEM vacuum switching valve is part number 17650-76010 but costs...

Just saw your response. Yes I did clean this out with MAF cleaner when I cleaned the Mass air meter. Ouch, this part is betwen $165-$200 new! There's a guy on ebay selling them for $88 each but I...

No, the problem never got fixed even after cleaning the MAF a few times as well as the IAC + TB once.

Sometimes the adage about "if it ain't broke, don't fix it" is a wise one to follow.

Thanks but I already have a coolant filter in place. No codes, no issues prior to the maf and idle up valve cleaning.

I have another coolant filter I plan to swap in as it's been a few years so...

Background:


Before I cleaned the MAF and adjacent 'idle up' valve, my car idled at a perfect 650rpm while the car was stopped and in "D". In addition I didn't have any issues with the car...

Not sure if you figured this out yet but the lug/pin that sticks out past the nut is NOT adjustable. You adjust the whole unit by loosening the bolt (as shown in the diagram) and sliding it until it...

Interstate AGM MT7-48/H6
CCA 730
CA 915
RC 130
Ah 70
48 month free replacement
MSRP $280


Long story short, I received this big-buck battery for free a few weeks ago. My Kirkland/Costco...

The requirements for my interior LED swap was that the whiteness would have to fall towards the warm end of the spectrum (<5,000 Kelvin). A few years ago I picked up 48-SMD LEDs off of Ebay for the...

Hold on tight, 4psi of boost about to pin you to your seats! :grin:


https://farm1.staticflickr.com/317/19604020739_d8ba35159b_b.jpg

Hi fellow Bay Area Previa pilot! I'll be making another thread about my crazy all-out LED upgrade. By the way, I saw your DIY sliding door repair video on Youtube. It'll come in handy when I get...

Figured it out! I have warm LED courtesy lights on each side of the the step sill/plate for the sliding door. I also added a sheet of anti-slip grit tape for security since the plastic can be...

I tried hooking up some courtesy LEDs I bought to the door jamb switch today, however I ran into issues with the polarity.

When the door is open and the dome light is on, I connect the LED leads...

Which bearing shop in Sacramento? I am not too far (in San Francisco) and would like to buy the exact ones you bought. Thanks!

Thanks for the heads up. Which specific Euro market glass lenses do I look for? Any keywords or identifiers?

Would something like these 1995 Previa Lucida headlamps bolt-on and work?

...

Does anyone know if the 91 through 93 Previa headlamp assemblies are compatible with my 1995 Previa?

I would like to replace my headlamp assemblies because the original equipment is extremely...

I've made this upgrade quite some time ago but wanted to share with my Previa people out there that you can add loads of additional light that is warm in color and draws very little power. Pardon the...

Yeah, curious minds want to know where you sourced the bearings and c-clips so we will know that it works! Appreciate the writeup :dance2:

Hi Tim,

not sure if my wheels were standard but I have 15" steelies with 215/65/15 rubber, front disc/rear drum on my 1995 Previa DX S/C.

Tim, appreciate the knowledge and wisdom. I'll take your advice and just top it off as needed.

I just came across this product by Permatex :dance2:

Wonder how well it works for my application.

http://www.permatex.com/images/stories/virtuemart/product/82099.jpg
A sprayable sealer that...

I appreciate the info. Do you think I can degrease the entire joint and just add gasket sealant around most of the connection? I know this is a crude approach but if I can add seal past the fluid...

Hi TVT members,

I am getting a slow leak at the transmission bell housing joint. I thought it was coming from the screw and/or lowermost area so I applied some FIPG sealant (as you can see) but...