I guess I rarely turn the wheels close to its maximum to hear a tire tread on metal sound when parking (should be worse if its weighed down)... although initially I think it was the drivers side...
Type: Posts; User: ArashB; Keyword(s):
I guess I rarely turn the wheels close to its maximum to hear a tire tread on metal sound when parking (should be worse if its weighed down)... although initially I think it was the drivers side...
I had it weighed down by a lot of wood this one time... luckily the tires sticking out havent hit the arches yet.
https://i.imgur.com/lvSo6E7.jpg
Just 2 weeks ago I fixed the other stalling and not starting issue I was having on top of the previous problem... the coolant temperature sensor! Only cost me less then $10.
It feels so good...
Maybe disconnect the idle air sensor and see if that makes a difference.
I wonder what would happen if you disconnect the TPS... my stalling and no start issue was due to damaged wires by the connecton.
Test drove the van twice since and I think this time renewing the TSB wires fixed the stalling!
Moving the cable around can change the dynamics... may not just be the sensor calibration.
Ive...
Thanks... but I think I spoke too soon... the car characteristics have changed, but it stalled today. Will be looking for more solutions and will start another thread in the future.
I think Im...
I run 235/55/r17(Nissan 350z wheels) with a 27.2' diameter and 9.3 inch width. There is slight rubbing on turns and knocks over speed bumps at a faster speed then normal.
This one time it bowed the...
"Once stalled she won't start for 5-30 min"
I was having the same symptoms... but I think I just fixed mine tonight... one of the EGR steel lines (modulator to valve) was completely plugged... bent...
Perhaps use a volt meter for shorts in the ignition coil too.
Ignition Coil...
Edit - wondering why constant coolant was pouring out one of the ports after I unplugged one of the EGR valve hoses?
How I got mine opened today... turning clockwise. 1 inch crowfoot. ...
Im having stalling issues too, this owner recently had his fixed because of the EGR valve not functioning.
https://groups.yahoo.com/neo/groups/previa/conversations/topics/60707
I have a bunch of...
Yes thanks you, I had found out that the main culprit was a sticky cable but also later that it had a broken supporting sheath... cleaning it up and re-positioning it better, the problem was 90%...
Extremely loud boom and jerk when shifting into drive or reverse!
Greeting, I recently cleaned the throttle body on my Previa (~240km/150miles) but after reinstalling it, shifting has been a...