Search:

I sold my van awhile back (miss that thing!) And have some parts I need to get rid of. Open to offers on stuff.
Tps sensor
Intake boot/hose
Toyota oem Head gasket, valve cover gasket, Intake...

Sold

I have some, what do you need?

Maybe $25 For intake tube plus shipping?

shoot me an offer via private message, lets see what we can work out

Just an engine, sorry

That is correct, sorry i cant help!

no good exhaust manifold. head is good, just needs cleaned up and new lifters and such as its been stored for a few years. yes its a 4yec. shoot me a pm and we can talk price.

look up some youtube videos on how a 4x4 with limited slip differentials work, then compare to locking differentials. i think that will help alot to explain how these systems work. its imperative...

no, the maximum traction is not 3 wheels, its actually only 2 with a 4x4, 1 with a 2wd, unless there are lockers involved which is another story and will gain more traction to more tires. i would...

yes i have both, head gasket set (bought 2 by accident when i did my head gasket) and head as well as the rest of the engine. no interior pieces unfortunately, just mechanical/engine and drivetrain...

Ok, so I have some parts I no longer need. i will update as i come across more, but a list so far:

Engine, head, gasket set
air intake tube, not cracked
4x4 auto radiator, can be used in manual...

it sounds like it is fine. both wheels will not turn unless you have locked differentials. having only 1 wheel spin is normal for non locking differentials.

if you were to turn one wheel by hand,...

Thanks for the reply. Can you tell me how to reset it? I wasnt able to find any info exactly on that, just the mention of it.

One thing to note, i came home on my dinnet break from work last...

So i need a little insight on the front blower. About a month ago it wouldnt work, i messed with the climate knobs and after moving the fresh/circulate back and forth it began working. Its been...

I'm also exploring block heaters. It's been -30F in the mornings the past few weeks and will continue, if not get colder. I don't remember having much issues starting my cars but this year I have,...

I have a set of bilstiens I have yet to install, I can get a part number off themy if you need it still. Can't confirm they will work but came from a van guy that said they were the ones

Thanks, I only let it run for maybe 30 Seconds to a minute, but I've already installed the manifold. I've only got it secured by the mounting points and to the other half but I'll recheck for longer...

Thanks for that tip. That would have been handy when I did my head gasket as I had a leaky injector and had to disassemble. I ran the test and didn't see any leaks, just heard some stuff working,...

Thanks, that's much better than the $100+ price from toyota or rockauto. Can they be sent to Dr injector?

Thanks tim, that's actually the exact quote I was referring to from you haha. I looked and can't really tell, it all looks about even, but definitely a bit more wet near the pcv and breather ports....

I read up on some posts and Tim said you can look and see if the residue is coming from the cold start injector or the pcv/breather side. I'm going to check tomorrow and see if there is any sign from...

I'm replacing my injectors and there is no torque spec for the fuel rail in the FSM. Can anyone help?

Ok so I just got new injectors and am in the process of installing them. When I split the intake manifold there seems to be oil in it, it also seemed to seep onto the gasket mating surface, so not a...

Thanks. I actually meant are the procedures outlined in the 87 FSM to diagnose the sensors, such as the procedure to diagnose faulty rpm signal, the same throughout the years. Just want to make sure...

Thanks, so I was assuming the wrong code. Instead of the air flow meter it's rpm signal. Still, I thought I might have been wrong and tested both aspects. It came out fine but I tested it based on...

Thanks for the reply. I did realize 84-87 where different than 88-89. I was told my van is an 88, I think the title may even say that, but it's a build date of December 87. I thought maybe I have a...

Ok so now I'm really confused. Yesterday I didn't have my volt meter with me so I borrowed one. I wanted to make sure it was right as I didn't trust it so I test everything again with my volt meter I...

Does anyone know why my check engine light just blinks repetitively when I try to check codes now? It's not doing it in the interval that the manual says is normal for no codes, I think 1 blink every...

30523053

Ok, I had a chance to do some diagnostics as per the manual in the included photos. My readings are this:

ECU
VC-E2 is 7.94 so within range
VS-E2 is 1.91 within range
VS-E2 at idle...

So today when I started the van it sort of stumbled and threw a check engine light. The light went out shortly after and it seemed to run fine. I checked the codes and got one blink and 2 blinks....

Ok, I let a bunch of MMO soak the cylinders for a few days and changed the plugs. None of the parts stores had or could get the stock plugs, either Denso or ngk, the closest I could get was the...

Thanks, I will do that in the morning and also see if any has seeped down at all. They were completely full so I'll be able to tell if it's soaking down at all.

Thanks. I wonder why these were put in then.using anything but what the manufacturer calls for is dumb imo.

One question: will the timing be affected by diffevent plugs? Basically do I need to...

Thanks for that. I am soaking the cylinders now with MMO and will replace spark plugs. I'll also recheck timing, check pcv system and possibly pull the valve cover again, clean it again and retorque...

Thanks for the input. As far as oil on the plugs if it's burning I wasn't very clear. I thought it would be dirty, black and wet looking if it was burning oil, not dry and white. As for additives I...

One more thing I'll note in case it helps is that upon a cold start the van turns over a few times before it starts. It doesn't just start right away. It's done this since I bought it. Maybe a timing...

I wanted to compare to what they looked like before the new hg. Here are photos of the same ones but before. They have all since evened out in appearance but are white similar to one of the ones here...

Forgot to add phot, here it is.2997

Ok so I pulled my plugs to do the oil in cylinders. I've attached a picture of one of the plugs. They all look exactly the same, but it's not what I expected to see if it's burning oil, but then...

I've been searching online for cheap tricks to unstick rings and ran across marvel mystery oil and atf, both being used in the cylinders through the spark plug holes and let soak and also in the oil....

Thanks for the extra insight. I'll look closers around the fuel pump on mine to be sure. I kind of thought the same about the cat and lack of smoke. Maybe the cat is catching it or something?

I'm...

I went to look at things and I think I am seeing oil under the intake manifold but I'm pretty positive it's from the few times I've spilled it trying to fill it. I'm going to give the atf fluid a try...

Thanks for the insight. The reason I believe it's the rings is there is absolutely no other signs of losing oil. The engine/transmission are completely dry, no leaks of ANY kind ANYWHERE. The engine...

Ok, another little update as I feel this needs addressed before too long. I recently took about a 500 mile round trip and I seem to be loosing oil at a rate of about 1/2 to 1 quart every fill up, so...

I know from recent experience. Check that the thermostat is oem and new, make sure head gasket is good, then make sure the radiator is good, get it rodded out or buy a new, it needs to be working...

I had my 4x4 rad recorded recently with a high efficiency 4 row. It was 325 I think by a shop in california. Not sure if it will work but I have a 4x4 auto rad I might be willing to part with. It...

Thanks! One more unknown part identified!

While messing around looking into putting in a kill switch I saw this part pictured. It has an adjusting knob that says RPM. What is this and what does the knobest adjust? Is it for the blower?...

FINALLY got around to putting the hose in. I had to order different fittings than I had, once those came I put the pump end hard line onto the rubber line. Looked like it would fit and with a bit of...