Yeah i blanked the egr and still had an issue. Then got myself a compression tester and checked the compression.
found that the furthest cylinder to the back of the engine, opposite side to the...
Type: Posts; User: Jon.Byles; Keyword(s):
Yeah i blanked the egr and still had an issue. Then got myself a compression tester and checked the compression.
found that the furthest cylinder to the back of the engine, opposite side to the...
So have the van running now and seems to be okay on idle though a little lumpy.
I drove it to a diesel specialist to get checked out and it blew a lot of black smoke on the way especially under...
Had a chance to run her warm this eve and I also replaced the fuel filter and put some deisel additive "ct60" in the filter & tank.
She's running much better now no smoke, a little white to start...
There was a link to it on another thread but here it is also: https://drive.google.com/drive/folders/1wkRH9TMi0O7L_YiCeadm2u6eLLUbsHgu?usp=sharing
It could do with being compiled into a single PDF...
Cheers guys, I have some CT60 so might try running that through with a new fuel filter to clean out the "cobwebs".
I didn't get to the point of running it warm as I was unsure of the sound I...
Just got her started!!!!
So happy :D after cleaning the injectors, oil and filter change, new glow plugs, new starter moter it fired!! and runs :)
However now I have a strange knocking sound....
My Starter was a 28100-64040 2kw which also seems to be what is listed as the correct kw for the 2CT 4WD Auto (i have an auto) (I also found my replacement on ebay, which does particularly help you)...
Okay, new problem :D
So new tester has arrived but my starter has decided to pack in. I took it out tested it an sure enough the solenoid is popping it out but the gear isnt spinning:no:.
so...
Okay so tried with some easy start and it definately fired breifly,
guessing this means I have compression. at least in one cylinder
it now turns quicker once the fuel is hooked up but still...
Ah, that makes sense now.
cheers originalkwyjibo, wish me luck :D
Jon
Awesome thanks for that. Wouldn't be surprised if the oil is too thin after you've mentioned that.
I will see what I can do with starting fluid also. Will update when I get a chance and also when...
So the test kit I bought doesn't seem to work as when cranking the needle bounces but doesnt hold a reading so thats getting returned and I'll have to wait again for another to arrive :doh:
I'll...
Just bought myself a Deisel compression tester so will wait for that to arrive, then let yous know how it goes :thmbup:
Still no luck, injectors bled, timing checked and correct. all vacuum hoses look fine..
I guess next would be compression test. Unless anyone has any other ideas..
spotted this in the manual so will give it a shot and see how we get on :D
10350
Cheers again,
Not yet I'll have a go and see how I get on.
Is there anything specific on this engine to look out for (with regards to bleeding the injectors) or would following a standard injector bleeding...
Hi there,
I've just got a Masterace Sport Surf Grand saloon with 2CT engine but it dosn't fire up...
She turns over on the key fine, I've replaced the glow plugs and checked they're getting the...
Thank you so much!!!