Search:

I went through the exact issue you described. After several non working controls from salvage and numerous headaches i just switched to manual cranks. Lots of hassle trying to get the pw to work for...

Tried posting a pic of my van with ladder but i always have trouble eith pictures. I like the tire underneath. The gate is for jerry can and box and bikes or whatever. Safety is a good point though

Ha. I know you're joking. So was i. Yah, trying to do it on a budget but several times i have made used purchases, gone to pull a part and the van is gone, part doesnt work....it doesn't really save...

GULP! Got anything in the $50-$75 range? I'm just a peasant farmer. :violn: i looked at these but the thread suggested the aisin originals were perfect for the price.

i had it earlier but now can't find the thread about which hubs are interchangeable with the '89. after reading it I found some 28 spline aisin manual locking on CL but he doesn't know what they...

Not sure if you have already done it but if you search for crusty lift here in the forum you will see he did some slight modifications and kept the old bushings in place so it was a true 2" lift. I...

that looks really nice!

I thought I recognized @go_somewhere_new. I have found several tire gates at the salvage yard for small SUV. They are about $20 so I wonder if a fab mount would be worth trying. kia sport, isuzu...

I'm in reno too. I go to the pick n pull all the time in sac, modesto, stockton. I will let you know when i go again if you need anything.

i have only found the maxxis big horn LT 27/8.50 r14 they are aggressive and they are kind of big in case you are not into that and the there is a BF Goodrich a/t 205/75 r14 but i'm told they are...

Yes it is code 21 then 22. I replaced the oxygen upstream o2 sensor and the coolant sensor is in process but ther seems to be a color variance on the cooling system wires. The reservoir wires are...

blah. no luck with that. I found the reservoir sensor underneath and it is close to where this wire is located but it is intact. I checked the dash lights and they are all working when i turn the key...

Ah thank you! That makes sense. I am getting a coolant sensor check engine code too... i order new sensor then the harness was fried to the sensor so i had to find a harness.... you know, the usual....

thanks Konerdude. I still haven't figured it out but the brake lights and e brake dash light works so i', still not sure....

is all this off an '86?

Going through the electrical trying to trouble shoot check engine light and I found this cut wire. I have gone through the manual and can't figure out what it could be. The van runs pretty well...

Thanks for all of your help Tim!

Just did my entire exhaust with some reused pipe from a different van, catalytic converter from rock auto and a welder. Had to jack ip the rear and take off the spare. It was one welded piece from...

So it turns out i have only 1 dead end plug and 4 wires where the other 2 used to be. Are all the dead end connectors the same?

Found a great condition salvage donor van for manual windows with panels nicer than mine. Hesitated a few days, went back and the entire van was gone.:wall:

Tim is it possible to make 1 good master switch out of 2 partially working switches? My DS door was not working and I bought a pick n pull master switch. Reset breaker and now DS works but PS does...

i know this is an old thread but i went through the same issues. instead of the car battery, using your portable drill battery works very well. any size drill. i also decided to go manual and found a...

from the lowest of lows to the highest of highs... :lol: this thread was awesome. reset breaker, plugged in pick n pull master switch DS window goes down for the first time in years ( i just bought...

hay tim where are the relays located in the 1989 le? i have similar problem. I played with it so much now that both sides don't go up or down on either switch. Started with driver side and i tried...