Search:

Recently replaced the thermostat with a factory Toyota 90916-03046 and the supplied o-ring is too small/thin. Replaced the o-ring with a Fel-Pro 35292 and had good squish.

Can confirm timing...

Hoping to get some help identifying wires. Because mines a camper I don't know what was an add on and what may be remnants of a regular van. Mine has a dome light just inside the slider with a...

I've attached a list with prices for what's left. Would entertain shipping for most of it. Text me for pictures as it's awkward to post them all here.

Fiveoh3 3 two0 2 five 9eight

Have you tried getting under the van and looking? Typically if left mostly empty everything rusts inside which would include your pickup tube, fuel lever arm dealio, and the pump. You'd also want to...

Van has officially been cut up. I have a lot of misc trim, HVAC, door cards, column, dash switches, etc. Physical dash pad was tossed.

Sold. Please lock.

Sometimes the drivetrain gets loaded and bound up. Rocking the van back and forth from forward to reverse will usually get it too. It shouldn't be grinding unless it popped into some sort of...

Sorry, didn't leave a link. I've got a couple in parts for sale. but I'm parting out the whole rig minus what's required for a manual swap. What exactly are you after?
...

I did clean and lube. I also srayed some silocone in the vertical channels. No matter what I did with the 86 window and the 91 regulator (loosened all the bolts, tweaked the regulator assembly,...

If you don't hear anything back check out my for sale ad here. You just after half shafts?

It's from a gasser and it's welded. Can come with ad much of the suspension as you want. Control arms, track bar, socks, springs, etc. Can we be scrapped 12/12. Pick up only in Orland Oregon.

$300

See pictures. Ideally I'd like to lop off the whole front clip of the van and sell it in one shot. Keeping the clutch pedal and shifters. Let me know what you after. Located in Orland Oregon.

All...

It's in a van I'm parting it. Runs good. Currently in the van but will be pulled 12/10 and either be scrapped with the rest of the van or sold to an interested party then. I don't have the room to...

Picture of the 86 door and the access hole to the front bolt. The bracket on the window as mentioned. Not sure what it would take to get it to slide on the window but it looks like 1" on the nose....

As far as the difference it feels like my 91 was slightly smoother in operation, maybe do to the CG being slightly different. This regulator seems to stick a little more at the bottom and rocks...

So they are not direct swaps. The window profile itself is the same. The bracket at the bottom of the window is 1" father forward on my 91. Looking at Toyota part numbers it looks like there's a...

Thanks. I picked up a parts van last night. Fingers crossed.

Does anyone know the front door window compatibility between the years? Looks like there might be a break in 08/88 but it could just be tinting.

Are you selling everything in the picture as a conversion? Or just the physical trans and t-case? What part of Idaho?

Does anyone have recommendations for a shop in the PNW that has the resources and know how to put a 3C-T/TE and manual in a 91 with a 2C with an auto?