Can anyone tell me where the compressor ground wire attaches to the van frame?
I cannot trace the wire and I have an intermittent ground issue.
I'm hoping the location is accessible so I can...
Type: Posts; User: 89TownAce; Keyword(s):
Can anyone tell me where the compressor ground wire attaches to the van frame?
I cannot trace the wire and I have an intermittent ground issue.
I'm hoping the location is accessible so I can...
Has anyone with Christmas lights ever experienced a fast clicking relay behind the glove box ONLY when the A/C is turned off?
So far I have checked all fusible links, replaced the alternator and...
I have an odd issue and unfortunately do not have access to a complete wiring diagram for my 1985 2wd van.
There is a valve under the front of my van, 88690-28010 "magnet valve". This is supposed...
The brand was Manzo. I picked them because they were the cheapest ones on Ebay, but they look really nice. They're blue.
I'll post a pic soon. I'm waiting to get my new wheels mounted so I can...
Just wanted to post this since there is basically zero information out there on the subject.
I took a gamble and ordered lowering springs for an 07-11 Nissan Versa. Someone on Instagram told me...
I still have it. Email me markb@baughneng.com
OEM sized sticker reprinted by JDM VANMAN and never used. Asking $20 shipped anywhere in the US.5331
I am selling a single 4WD sticker silver/red that I bought from JDM VANMAN a while back, but I never used it because I sold my van before installing it. It's in mint condition. Asking $20 shipped...
I had this issue with my TownAce. The Xmas lights were because I had converted to a 1-wire alternator. If the 12v reference line isn't connected, you'll get the xmas lights. It's one of the wires on...
Hopefully you didn't have a runaway diesel. That can happen if you or someone adjusted the fuel injection pump to run too rich. Basically, once a runaway diesel starts, there's no way to stop it...
Awesome news!
Been discussed many times on the ancient Ace Answers forums, not sure if anyone ever ended up installing one.
Go to the turbo section http://www.townace.plus.com/aanswers.htm
That's very good to hear. Still I'm bummed for you guys, but happy you got her back.
On my last van I installed a remote operated kill switch on the battery. I don't remember where I bought it...
As far as I know there is no safe way to tow a 4wd, 4x4 or AWD vehicle with a 2-wheeled dolly. They need to be on all fours or on a flatbed. Obviously you just learned this the hard way and I wish...
PinballMolly on Instagram has the unit in her van now. It's so sweet.
Duuuude that's a bargain and a half! It is really well engineered it appears, but why would you want to remove it from your van!? It looks like the whole interior is custom matching. Years ago I...
VERY likely the distributor cap. It's a common problem on old Mini Coopers because the disty is right behind the grill. A lot of guys wrap their disty in a plastic bag when it rains.
I'm so excited to get my shirt :clap:
That's a great deal. I kinda wish I had a need for them lol. I'd definitely meet you halfway if I did.
You're very fortunate to be close to the Canadian border. Contact the guys at http://www.silkroadautos.com/ they are able to get parts and will at least give you a recommendation if you can't take...
Shell Rotella T6 5W-40 fully synthetic diesel oil.
No I didn't bring my Subi to JCCS, but I know the owners of the two vans that were there. Mine is a bit nicer than those. AAA will not do agreed value...they use NADA value. Which is stupid because...
I almost bought her FF-1 from the previous owner. I'm sure you know the story of how the guy restored it, then found out there was a hole in the block. He was selling it pretty cheap and I was...
Wow nice you have an FF-1. You must know Jamie (SubieGal). I have a restored 1970 Subaru 360 van.
Hey guys I just wanted to let you know that I put collector car insurance on my Town Ace. I previously had Geico, but I knew if something major happened they would short me on my van's value. So I...
My double seat swivels 180 degrees or 90 degrees. The single seat only goes 180. I kinda like it like that though. It doesn't block the entrance.
Just FYI my JDM 1989 TownAce Nippon Denso pump is also model 22100-6a660. I researched alternatives for a long time and ended up having my pump completely rebuilt, using some Bosch parts for...
Keep searching the Japan auctions (yahoo, ebay, etc) for that part number. It will come up eventually. The 1986 Toyota Camry Diesel used a 2C-T, but finding those are just as difficult.
Your van might have a different engine than mine. Some of the resources I pointed out may cross reference, but you might need to find a better source of info for an L engine. Chances are it was used...
You gotta love that proxy buying service. I got all my replacement lenses thru them after my van got banged up.
I don't know of any VIN based database for these vans, but you'll find a lot more information here http://www.townace.plus.com/aanswers.htm
I did a lot of research on the 2C-T engine before purchasing mine. They're bulletproof if properly maintained. Parts are scarce however, but most can be sourced from Japan. Some parts can be found on...
It could be very simple...or it could be very complicated.
For the simple it could be: stuck/broken throttle cable, improperly adjusted throttle linkage, improperly adjusted primary fuel...
That's actually a great deal.
Awesome congratulations! Let us know what the damage ends up being for shipping.
I'm trying to figure out what size speakers my van has so I can upgrade. I know I can easily access the front speakers to measure, but the rears are behind huge interior panels and I'd prefer not...
If my rear window ever breaks I'll probably just make a custom louvered panel or something until I can find a replacement. That glass is basically unobtanium. I searched for a couple months and found...
You're doing God's work my man. Someday I shall call upon you for your glass inventory.
You need to join a Japan ordering proxy service. I use www.fromjapan.co.jp for all my hard to find parts. The site searches multiple Japanese sites at once including Yahoo auctions Japan and Amazon...
Danny I used the Napa FIL 6225 air filter, but it's about 3/8" short so I bought a 1/4" thick sheet of foam rubber, cut donuts for the top and bottom as spacers. Works great.
OK sorry for the crappy pics. My driveway is a bit crowded at the moment.
I couldn't find a way to hold the tape measure against the van for length so I just laid it on the ground and sighted the...
Is there still an interest to reproduce the TownAce 4WD side graphics? I've been meaning to take good pictures and measurements of mine. If this is still a possibility then I will get it done this...
I'm pretty sure manual vans are more valuable than automatics. They're definitely more rare and I'd certainly pay more to have a manual. My advice would be to sell your manual, then buy and really...
Yeah mine only whistled when I was on the throttle. It was the exhaust leaking between the engine head and exhaust manifold. I removed the manifold and put a straight edge across and it was warped...
I had this and it ended up being a warped exhaust manifold. Different engine, but worth looking at.
Ace Autosports did good work. My van has zero fuel or oil leaks now. My whistling ended up being a warped exhaust manifold, but I replaced the turbo anyways. I machined the manifold myself at my...
I'm also considering an engine swap. Possibly to a gas 2.7 Toyota engine.
If I do that I'll let you diesel guys know when my 2-CT is available. It's a good engine, just has a finicky pump.
So after over 4 months with the same mechanic we've decided give up on solving the rev hang. Pickup up the van this weekend. It is running, but how well I'm not sure yet. I'll find out on Saturday.
...
I can't really tell what you've done in that last pic, but let me tell you how I solved the same situation several years ago.
I used a BIG ASS drill bit and drill right through the broken...
My van is super close to being back on the road. It's got a new injector pump gear and timing belt. However the issue now is the engine is slowing down way too slowly after giving it gas. My mechanic...