i still have them if you need them.
Type: Posts; User: jdweasel47; Keyword(s):
i still have them if you need them.
1. Remove the driver seat/metal plate to get maximum access.
2. Take pictures before and during take off. Using masking tape and marker to mark hoses and wires (there is a ton) I use words and...
i think so, can't remember where i put em,-----let me look tonight!
jamie
I have the rear window glass out of 84 or 85 van. Let me know if you might need one.
Two months ago, I replaced some very worn original front suspension parts, 30+ years old on a 87 2wd Van, the front was super loose. The new inner/outer tie rods, upper/lower ball joints, 2 new...
I made this repair as well, hardest part was starter removal and reinstall (very greasy)--the starter disassembly and replace was a breeze. The copper "L" shaped connector on the "hot-side"--powered...
Hi Guys,
I think we all know the limitations/frustrations of Toyota Van cooling systems with enough hoses, clamps, and metal lines to irrigate a farm. I tried a pressure test and immediately...
I am interested in front driver and passenger door cards, sliding and rear door cards if you have them.
https://shop.harborfreight.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_11238.jpg I would HIGHLY RECOMMEND a Transmission Specific jack, like the one...
Do you have the antenna?
Hi Cornell,
Glad these are something you can use. IF you need em both, I can tell you I am going to list them as a pair on e-bay with a auction starting at a certain time/day and you can pay by...
Hi Guys,
Here are a few Amber/Orange side marker lights for older Toyota Van.
Both are Rights, stamped Toyota 28-18 SAE AP2 81 Japan koito dot
12 V R
In pretty decent shape. $15...
Hi Guys,
I think these are off of 1984 or 1985 Toyota Van (different style on my 87) Both Appear to be rights, Stamped Toyota 28-12 R Japan kotto R 8223 Orange Amber color, no hardware
One...
To be honest, the difference between 58 ft pounds and 76 ft pounds is 1-2 clicks on on the torque wrench, a 1/8 to a 1/4 turn with a socket. Plus, you need to slightly over/under tighten any stud...
On the sliding door track, at the end of the track, there is a trim piece maybe 3-4 inches long (closest to the taillight). Do you have that piece?
It is the same pump for both front and rear, I recently changed mine. Less than $15 plus shipping from Rockauto. Both Pumps (Front and Rear) are attached to same washer fluid tank inside the van by...
From what I know, the upper A arm is in action and wears a lot more than the lower, if the lower looks good, i would leave it. If you have the "squeak, squeak, squeak" every hard brake, bump in the...
First, spray everything liberally with penetrating oil (Like PB Blaster) Next, put the nut on bottom ball joint stud at least 5 threads, just don't let the stud be exposed through the nut. Last, hit...
Looking for passenger rear factory Toyota mud flap/ splash guard for 1987 LE toyota van 2x2
No, the old bulbs would still function when grounded, the ground to the lows went bad somewhere---just not sure where. When the additional "fresh" ground was added, everything worked properly...
Having brought a Van back from Arizona to Michigan, I have learned the trade-offs. While the Michigan vehicles from the 1980's of course have horrid Rust issues (I have a 1984 Fiero---Michigan Whole...
1987 Van LE Problem----No Low Beams. High Beams---all four lights---Good, switch the stalk to Low----Blackout.:cnfsd:
After reading a little on-line I came up with a solution, running a new...