Thank you Tim for your quick a great answer! I read some of your old posts about the aftermarket FPR and I decided to go with an OEM FPR, if I can find one.
I looked online and unfortunately the...
Type: Posts; User: iq_artwork; Keyword(s):
Thank you Tim for your quick a great answer! I read some of your old posts about the aftermarket FPR and I decided to go with an OEM FPR, if I can find one.
I looked online and unfortunately the...
I'm looking to buy a OEM Fuel Pressure Regulator for my van.
Is the part #23280-7310 FPR discontinued? or is there another FPR with a different part number will fitting in our vans?
thanks
Here is how I built my middle console from scratch. I hope you will find it interesting and helpful. This is my first time I’m using these products, maybe you can come with better ideas.
As a...
thank you Burnboot and Trestlehed.
'84 are using steering gear boxes, I removed it today and I'm planning to rebuild it. I took couple of pics so I will post them here later.
thank you!
Hello everyone,
I have a leak in my ‘84 manual 2wd steering gear housing (gear box). I’m thinking to replace it and get a rebuilt one or would changing only the gasket be ok?
Also I couldn’t...
Hello everyone!
I'm trying to fix my front heater for my '84 Van. I did all the repairs below the air from my heater is still not working, any suggestions?
I would like to mention I have the...
Hammervan thanks for your reply!
Yes, I agree! :thmbup:
Hello again,
I took my van back long time ago and drives fine. But I still wanted to do some tests to make sure everything is fine. So I went to another mechanic shop for a head gasket test and...
Here a youtube video with 3 different videos from my van.
https://www.youtube.com/watch?v=vjGsGE0yCns
As you see in the videos, my van has only 2 metal pipes going from my TB direct to my...
Hello everyone, I have a question about the BVSV.
I was trying to find it in my van and I think I don't have one, can be possible. Please see attached pics.
10489
These two hoses on the...
Amazing! Thanks again Tim! :thmbup:
Thank you Tim for your reply! I have ordered the sensor and it's on the way.
Today I checked under my Van and I noticed my 02 sensor is broken and looks like always was broken. But I have never...
Hello everyone,
I ran my codes today and I got the code #5 (oxygen sensor signal). So I'm planing to replace it in my van.
I have heard and read some vans have 2 sensors and some ones one senor....
Also they replaced one of my manifold gasket bc the old one broke when they removed the manifold.
I'm wondering, is coolant passing through the manifold and from this gasket?
10430
Hammervan and Burnboot thank you very much for your replies!
Burnboot, I can see the test is not locked down, just noticed that.
From tutorials I have seen online the needle goes from 0 and up....
Hello everyone I hope you are doing good. I need your help please with an issue I have with my van.
I have an ’84 Toyota van for a year and a half. When I bought the van, I had few overheating...
Hello everyone,
For 84-85 3Y, is the ECU the same in Manual and Automatic vans? If I find one in the junk yard, is there a way i can check if it's working?
thank you!
Nice, Thank you very much Tim!!
Ops I'm sorry about that :).. I published it now.
My other question is,
I removed the feeler gauge and open and close the TB, do I need to have continuity all the time?
Hello everyone,
Today I tried to adjust my sensor on my TB. I bought a new Beck/Arbley #8945214020 from RockAuto.
Here's a video of my process, is this right?...
Tim thanks again!!
Tim thank you very much!! What's the best material for that?
I have seen youtube tutorial using this material:...
JDM thank you very much for your quick reply.
I think I'm not going to risk it, I will stay with my TB I have in my van now. I just have to take it and clean it. I though it will be faster for me...
Hello everyone and Happy 4th!!
I got this TB from an automatic '86 van. I cleaned it and built a gasket. For the gasket is this what I need or do I need to make the other caps i have marked with...
Hello everyone, I'm looking to replace my injectors. Are these the right fit for a '84 van?
...
Thank you very much Tim!
Thank you llamavan, what confused me more is I don’t know which one is the inlet pipe from the extra radiator mod, the upper or the lower part?
Hello everyone, I’m working on my extra radiator mod. As you see on the pics the old owner didn’t connect the heater hoses and he was using this hose loop. I have never turned on the heater in the...
Hello everyone and '84 Van owners.
After some research I found out the '84-'85-'86 2wd vans sharing the same upper arms.
In RockAuto unfortunately you can't find the whole upper arm for '84...
So I found this site selling these whole upper arms for '84
https://www.partsgeek.com/catalog/1984/toyota/van/suspension/control_arm.html?rp=control_arm_and_ball_joint_assembly
But then the same...
Hello everyone!
I have changed all my ball joints, stabilizer bars, tie rods, lower arms and my shocks are replaced few months ago. So I'm still hearing a squeaky noise sometimes from my...
Fastcanoe thank you very much for your quick reply! First I will try adding some WD-40 silicon grease or Deep Creep, to see if it’s does the job.
Are the bushings for the upper control arm all...
Hello everyone, I’m getting this squeaky sound on my van as well. I have an ‘84 van and I have replaced all the ball joints, lower control arms, stabilizer bar and my shocks are less than 8 months...
Hello everyone,
i have done some work on my ‘84 van’s suspension and I’m looking to buy these bushings in the picture below. Does anyone know what’s the right bushing size I need.
also I’m...
Burnboot, yes I removed the cap with a screwdriver and I cleaned the inside of my reservoir as well. I noticed with my PS reservoir, the screen was connected around the metal and it wasn’t 2...
Burntboot thanks for your reply!!
You are totally right!! I’m not sure if they are the original ball joints but from the pics are not looking that bad, I will check them out while I’m working...
With some research, I think the name of the part I asked above, called Steering Knuckle and on top of it is the upper ball joint.. please let me know if IÂ’m wrong..
So by changing the rest of the...
I'm changing my rotors and pads... And I thought it will be a good idea to change more parts while I will have the space.. So I just ordered from AutoRock 2 Stabilizer Bar Link for both sides (MOOG...
I was wondering the parts from Rock Auto for 2wd lower and upper assemblies (bushings and ball joints included)
Moog #RK621261, RK621260, RK641388, & RK641387
Will be OK for a '84 Van?
So...
Burntboot thank you for your quick reply,
When I removed my PS reservoir it's was really dirty, I used a Paint Thinner with a toothbrush to clean it. When I opened the cap, the screen was broken...
Hello everyone!!
I was able to drain my old fluid (and it was yellow dirty dark, I think my old mechanic added dot 3 or something else). Then I cleaned my PS reservoir and changed the small hose...
Hello everyone,
So I'm getting some noises when Im turning my steering wheel and there is a small small leak at the top of the pump. I'm planning to clean my PS reservoir / screen and change my...
Hello everyone,
I have a Toyota Van 1984 2WD and last week I lifted it up by adding a daystar spacer at my rear coil springs and cracked up the torsion bars.
The tires I have now are P185/75R14...
Flecker, are these two parts the same?
Flex line:
Toyota Part #90931-01021
Centric part # 150.44305
Thank you and Happy Thanksgiving!!
Ok great!! Thank you very much for all your help!!
WoW man thank you very much for all your help and tips you shared with me. I will defiantly try them. I do still have a few questions, if I have to change the connection with a flare do you let the...
Thank you very much for your response and help.. I'm adding some more pics here with higher resolution. As I can see one part connects all the way down to the slave cylinder and yes it's leaking at...
Flecker, thank you very much for your reply. I took my dash out and my console so I can easily check my master cylinder and the hoses if they have a leak and everything looks ok. I also checked my...
JDM VANMAN thank you again!! I will read the link you sent me and search more. I forgot to mention my clutch and my gears work fine.
So I read about the master cylinder, and I believe it’s something I will replace soon, as well as the slave cylinder. I still have some questions please.
I will give you a briefly story about my...