All the threads say pull the radiator out from underneath. There is a far easier way to do this. Remove the passenger seat ( 4 bolts, the back closest to the door is a stud , the nut is in the wheel well. Then, Remove the passenger side engine cowl ( a dozen bolts or so) You dont even have to disconnect the transmission shifter, just slide the assembly and cowl aside and the whole engine is open to work on. remove the fan shroud ( two pieces, the bottom unclips and then the top slide out easy). Pull the hoses. Unscrew the two retaining nuts on the bottom and the center bolt on top. And the radiator slides right up and out. Easy Peasy