Page 3 of 3 FirstFirst 123
Results 41 to 48 of 48

Thread: Part numbers

  1. #41
    Administrator JDM VANMAN's Avatar
    My Van(s):
    89' TownAce Auto SuperExtra 87' 4x4 5spd LE 87’ 4x4 5spd Cargo
    Join Date
    Mar 2014
    Location
    SEATTLE, WA
    Posts
    2,450
    Rep Power
    10

    Re: Part numbers

    JDM TownAce YR21 series


    Even though my JDM van isn’t a diesel van but the parts are unique this will help in this section


    Protex- Brake Master Cylinder





    Blue Print- 2WD Brake Shoes








    JDM

  2. #42
    Forum Newbie
    My Van(s):
    '92 TownAce 4x4 5spd Cargo Diesel
    Join Date
    Jan 2020
    Location
    Brooklyn, Ny
    Posts
    5
    Rep Power
    0

    Part number Index by Vin #

    If anyone is looking for a thorough and accurate resource for all part numbers
    and cross reference needs Toyo-Diy has been excellent while herding parts for a
    deep tune up. Enter your Vin # and it knows your van down to the paint color.





    https://www.toyodiy.com/parts/q.html

  3. #43
    Forum Newbie
    My Van(s):
    1991 JDM Townace Cabin Cruiser
    Join Date
    May 2020
    Location
    Phoenix
    Posts
    11
    Rep Power
    1

    Re: Part number Index by Vin #

    Thank YOU! I've been using this a ton lately. Even helped me during a sale.

  4. #44
    Forum Newbie
    My Van(s):
    1991 Toyota LiteAce
    Join Date
    May 2018
    Location
    Chula Vista
    Posts
    9
    Rep Power
    0

    Re: Part numbers

    2CT was available in the US in the 1986 Camry. Lots of parts available there.



    https://www.rockauto.com/en/catalog/...harged,1272776
    Attached Images Attached Images  
    Last edited by nomoneymike1; 09-16-2020 at 03:55 PM. Reason: Forgot to add pic

  5. #45
    Forum Newbie
    My Van(s):
    1994 TownAce 4WD (Diesel)
    Join Date
    Jun 2019
    Location
    Utah
    Posts
    5
    Rep Power
    0

    3CT Starter

    Part number is 28100-64280. Thought I'd have to spend nearly $400 bucks to get one from England, but I found part 28100-64020 on eBay for less than $60 shipped. Had to modify the electrical connection from the ignition side using a butt splice connector with the old starter connector, but it works like it should!

  6. #46
    Forum Newbie
    My Van(s):
    1994 TownAce 4WD (Diesel)
    Join Date
    Jun 2019
    Location
    Utah
    Posts
    5
    Rep Power
    0

    2 & 3 CT AC Compressor

    So the part for my specific 94 3Ct van (CR31) was 88320-28240. That part basically is unfindable/no longer manufactured. I rolled the dice on the more modern 2C engine (CR41/51) version 88320-28270 and it worked. Pully was a little smaller, but found a belt and it all works - bolted right up.

  7. #47
    Forum Newbie
    My Van(s):
    '96 toyota townace 4wd rhd 2.2 liter turbo diesel engine
    Join Date
    Mar 2022
    Location
    bend oregon
    Posts
    1
    Rep Power
    0

    Question Re: Part numbers

    hey I just got a 96 townace and I'm wondering what oil i should use and the oil filter part number

  8. #48
    Van Fan zack_008's Avatar
    My Van(s):
    1991 TownAce MRV Pop Top
    Join Date
    Feb 2022
    Location
    Portland
    Posts
    34
    Rep Power
    1

    Re: Part numbers

    Recently replaced the thermostat with a factory Toyota 90916-03046 and the supplied o-ring is too small/thin. Replaced the o-ring with a Fel-Pro 35292 and had good squish.

    Can confirm timing belt, associated pullies, and water pump numbers supplied here are good and work. I did cross reference one of the pullies to an ACDelco number to save a couple bucks.

    Alternator belts and mounting bolts are an absolute pain. Just remove the lower water outlet tube. There's two bolts, you don't have to pull the hoses, and push it out of the way. I used sealant versus trying to cross reference the gasket to something available locally.

    AC Belt - Duralast 17325
    PS belt - Duralast 310K3
    Alternator belts x2 - Duralast 17400
    Upper Radiator hose - ACDelco 22805L (Need to cut this down but is the right ID and available. Found it in town for $30. 35MM or 1.375" ID both sides. About 12" CL distance)

    Side note: I might have score the last NOS NLA lower radiator hose off Amayama.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •