Page 3 of 3 FirstFirst 123
Results 41 to 44 of 44

Thread: Have Previa - Will Lift

  1. #41
    Forum Newbie
    My Van(s):
    Toyota Previa 1992 AWD ABS LE Lifted. Toyota previa 1991 rear wheel DX sold Toyota previa 1994 rear wheel non/SC LE sold Toyota previa 1991 rear wheel LE sold
    Join Date
    May 2017
    Location
    Santa Rosa, CA
    Posts
    10
    Rep Power
    1

    Re: Have Previa - Will Lift

    Same color I believe, of the one I sold to my old room mate. I replaced the shocks, struts, rear coils and strut mounts, etc on it except the front coils (they need to be custom made now a day $300 because as I understand it they have been discontinued, would be nice to find an front coil of similar specs to the Previa from an different make and model) and had new tires on it. She lives in that area of Seattle. Though my intuition is thats probably not the same rig. ~ ; ~

    Edit: Ooo I took a closer look and now id bet its the old 91 DX i used to own (I loved that van) It has the dent on the back!
    Last edited by previa tank; 06-20-2018 at 09:22 PM.

  2. #42
    Van Fan
    My Van(s):
    67 Chevy 69 Chevy 70 Chevy 96 Previa 04 Sprinter
    Join Date
    Oct 2015
    Location
    the great Pacific Northwest
    Posts
    30
    Rep Power
    1

    Re: Have Previa - Will Lift

    Regarding Previa front spring availability, RockAuto lists complete Sienna strut assemblies (strut, spring, cushions, mount, etc.). The upper end of the spring is different from the Previa, but, assuming the 3-bolt pattern is the same, it should work.

    https://www.rockauto.com/en/catalog/...assembly,15174

    As a bonus, the springs should be stiffer than the Previa because of the Sienna's front engine configuration.

  3. #43
    Forum Newbie
    My Van(s):
    Toyota Previa 1992 AWD ABS LE Lifted. Toyota previa 1991 rear wheel DX sold Toyota previa 1994 rear wheel non/SC LE sold Toyota previa 1991 rear wheel LE sold
    Join Date
    May 2017
    Location
    Santa Rosa, CA
    Posts
    10
    Rep Power
    1

    Re: Have Previa - Will Lift

    Thats awsome Tbuyan! ^ _ ^ I may well end up trying this out. first id cross reference the specs for ride hight, order one and an previa strut mount to an auto parts store to compare the bolt pattern.

    My current previa I believe has an bent frame from the look of it and what the alignment shop says (quarter of an inch off or so), so first ill try bracing the frame and pulling on the one end to try twerking the frame before I buy another AWD previa but my eyes are sorta on the market again. ~ ; ~

  4. #44
    Van Fan
    My Van(s):
    67 Chevy 69 Chevy 70 Chevy 96 Previa 04 Sprinter
    Join Date
    Oct 2015
    Location
    the great Pacific Northwest
    Posts
    30
    Rep Power
    1

    Re: Have Previa - Will Lift

    No need to check ride height. These are the same struts I use for the lift, but are "loaded" with springs, mounts, etc.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •