still on my quest to replace my CV axels, inner boots blown on both axels. 4wd seems to work, but snow will be flying before we know it...

I posted a video if my current axels HERE =>
https://www.facebook.com/christopher...36146/?fref=nf

There is a bit of play so wondering if that is damage (buy new axels) or normal due to lack of grease (tear down and rebuild existing)

----

My question is assuming the looseness is bad and I need new axels I have a part # mystery I uncovered on ToyoDIY that needs solving...

My VIN shows 43430-28010 as the part number
http://www.toyodiy.com/parts/p_U_198....html?hl=43410

Cross referencing the 43430-28010 part I get this list of vehicles:
http://www.toyodiy.com/parts/xref?s=43430-28010&mU=on

Based on this posting I also tried 43430-28011 just for kicks and noticed there is overlap, indicating the parts are interchangable even tho they have difference part #'s (??!)
http://www.toyodiy.com/parts/xref?s=43430-28011&mU=on

You can also see here that both parts show the same van config:
https://www.toyotapartsdeal.com/oem-...xle_shaft.html

So the question is whether is whether a 28010 and 28011 are interchangeable?

-----