On my '94 Previa (ABS and disc brakes all around), on the front brakes I have the pad support plates installed differently on passenger side from the driver side. One side has the outer pad support plate clip tucked in between the caliper carrier and the pad keeping tension on the pad, the other side has this clip coming outside of where the pad runs on the caliper carrier and instead ends up springing out halfway down the pad. Does anyone have a picture of the proper placement of these pad support plates? The FSM doesn't seem to say and I'm not 100% which way is the correct way. I attached a photo below of the way I believe these pad support plates should be installed.
Thanks!
20191017_172049.jpg