Originally Posted by
PNW vanwagon
not sure if it helps you: but i saw a youtube video that fixed my floppy seatbelts. you soak and squeeze them in almost boiling water + dishsoap you'll be stunned by the amount of brown / black stuff that comes out. then take 6" of PVC pipe and slit one side open lengthwise. feed the soapy belt into the slit, squeeze while sliding it down the seatbelt. again you'll be amazed at the amount of dirt that comes out. i did this 3 sets of hot soapy water. let them dry and sprayed a little bit of silicone on the belts and now they retract and snap back well enough.