Parting out 4x4 TV

[AD2101]

AD, could I trouble you for a pic of the wall just above the battery door? I have the lower outside metal pushed in (PO damage) and want to see if its possible to push some of it out from inside. This saves me ripping the inside panels off unless its going to actually help.

Too bad the sliding door is gone. Mine also has that lower panel damage (probably big city parking lot damage...), and I'd like to see if that has access.

I actually still have the sliding door, so I'll take pictures of both and report back!

Any chance you have this part? - plastic box with big plus sign on it. small bolt inside plastic needs to be securely fastened to the plastic. Mine wiggled free and bolt is floating now.

That part sold, sorry.

[izzymarigold]

I'm looking for parts for an 86 2wd toyota van, I'm thinking the parts I need should will work from your 4x4. I need the driver side window regulator, as well as the drivers side taillight assembly. Either of these parts available on your van? Thanks!

[AD2101]

I'm looking for parts for an 86 2wd toyota van, I'm thinking the parts I need should will work from your 4x4. I need the driver side window regulator, as well as the drivers side taillight assembly.

Unfortunately both of those parts either sold or were broken. For what it's worth, the window regulators only differ depending on whether or not they're power or manual. Trim level will determine if the taillights are compatible or not.

Good luck hunting down those parts,

- Perry

[AD2101]

AD, could I trouble you for a pic of the wall just above the battery door? I have the lower outside metal pushed in (PO damage) and want to see if its possible to push some of it out from inside. This saves me ripping the inside panels off unless its going to actually help.

Too bad the sliding door is gone. Mine also has that lower panel damage (probably big city parking lot damage...), and I'd like to see if that has access.

Here you go!

IMG_20190408_164546395.jpg

IMG_20190408_165014322.jpg

Hope it's helpful!

[outlawmws]

Thank you! definitely worth inside panel removal and getting a slapper and such inside there!

[AD2101]

SOLD:
- Parking brake cables x3
- Gas door
- Rear mud flap (driver's side)
- Radiator
- OK Monitor
- Sliding door handle

[8unity8]

greetings ...

O/D relay/computer ... and solenoid

my buddys been running on a solenoid he Rewrapped more than once... Are these parts still available...he says...located under the console ...TY for any assistance

unity*

[AD2101]

PM sent!

[AD2101]

SOLD:
- Rack and Pinion
- 4x4 vacuum canister (?)

She's starting to look real sad now but there's still some parts left that need a new home!

[cpginkpt]

_{I would grab the + box and headlight relays if they are still available and good.}

[AD2101]

The + box sold a while ago but I still have the headlight relay, shoot me a PM if you're interested.

- AD

[Wrench]

How much would it cost to ship the rearmost driver side window? Also need the silver driver side body trim and the driver side headlight plastic (the piece to the left of the headlight.) Also outside sliding door and rear hatch handles but I know that's a goose chase.

Thanks so much!

[Wrench]

How much would it cost to ship the rearmost driver side window? Also need the silver driver side body trim and the driver side headlight plastic (the piece to the left of the headlight.) Also outside sliding door and rear hatch handles but I know that's a goose chase.

Thanks so much!

oof, got excited and psoted this when i saw the thread, looks like most of it's gone at this point :(

[JDM VANMAN]

oof, got excited and psoted this when i saw the thread, looks like most of it's gone at this point :(

Just for clarification are you in Vancouver WA or Vancouver BC, shipping international will not only be expensive but need customs paper work and duties.

JDM

[Wrench]

Just for clarification are you in Vancouver WA or Vancouver BC, shipping international will not only be expensive but need customs paper work and duties.

JDM

BC, but I was thinking I'd likely have the stuff shipped to somewhere on your side of the border & go pick it up. Simpler / cheaper that way.

[outlawmws]

PM sent:

[JDM VANMAN]

AD2101,

Are you pulling the auto tranny before sending it to get crushed?

JDM

[AD2101]

I will be! Know anyone who is interested??

[AD2101]

Aww bummer someone called the cops!

cops.jpg

This slightly accelerates my plans with what remains of this thing, I guess tomorrow I break out the sawzall and have myself a day getting this as chopped up as possible. The end goal has always been to keep the drive train and power train together since that's where most of my desired parts are, so I was just going to cut the whole body off down to the floor as a rolling deck, tarp it up, and roll it into a corner of the property.

I mean it does look objectively terrible, but I really wish the reporting party would have just swung by and talked to me instead of running off to the cops. If it was an abandoned car I would get it but I've been actively working on this thing since I got it. Oh well, tis the times we live in now.

IMG_20190422_181023155_HDR.jpg

IMG_20190422_181101525_HDR.jpg

More updates to come!

[Wrench]

What a dink >:(