Search:

1023410235

i have a spare throttle body i was cleaning up as practice for cleaning the TB currently attached to my van.

While disassembling this TB, the plastic spacer for the springs...

link to McMaster-Carr M3.5 X 0.6 screws. Sold in qty of 100.

https://www.mcmaster.com/screws/system-of-measurement~inch/thread-size~m3-5/length~16millimeters/

Are coolant hoses 16267-73010 and 16264-73021 still available? I’m striking out with those.

Anyone every come up with a part number for the EGR Valve gasket?

Having some EGR issues in my '88 le 4x4. Bought a used EGR Modulator from someone parting out an '86 DX.

Was going to buy the EGR Valve as well, but was informed about a difference in the part...

smoke testing my vacuum system for leaks, there was a lot of smoke (vapor) coming out of the egr valve and egr modulator. Is this normal?

At the beginning of this thread the FPD (for an 88) is referred to as PN 23207-12005. When I enter that into toyotapartsdeal.com it comes up as “no results”. I’m confused. Should it be 23270-12005...

Gotcha, thanks Tim.

9777

Got one of these? Idle-up VSV. PN 90910-12003.

Some of this comes from the “what is this/part number” thread. Posts 259 and 260.


From Member AD2101:

Tim,

Any idea if there is a functional difference between Idle-up VSV 90910-12003...

9718

Part/part number? would this affect idle speed? Replaced valve cover gasket and looks like this got broke in the process. Idleing in start up at close to 1800rpm. 88 4wd manual.

After following this thread for its entertainment value, I have a suggestion worth considering.

First, while annoying and frustrating, freeing rusty nuts and bolts should be skill set number...

Thanks Flecker. Its not gear oil, so thats rear main? I may have to dig deep. I dont have anywhere indoors to do this sort of work right now and idaho is getting chilly. I wish they had replaced...

Any final diagnosis? I'm losing near a quart every 500. I've parked it at this point, but the underside of my transmission looks exactly like these photos. Transmission apointment being made first...

Bummer. Showing both as NLA on toyotapartsdeal.com. You got the last one you lucky rascal.

Beetleswamp, got a link? They sold out?

This thread has been incredibly helpful as I try and tackle this fix.

However, I’m encountering a similar situation as AD2101 in post#39. All the shops I go to can make the line with the female...

Thank you.

‘88 4x4 manual. Part number for this BVSV?

9486

9487

Tried to PM, box is full. Very interested in vermont.

Didn’t see a solution to this broken part in the thread. It’s the cable that connects the handle mechanism to the latch. Think a bike shop could fabricate one of these?


9134

Started this little project last night with help from the boys at Sheet Metal Fab in Ketchum. First version is steel. It went much easier than expected. We may take another go at it with aluminum,...

Thanks for verifying that Tim.

The plan was to inspect everything this weekend. Based on what I have read in this thread and others, IÂ’m probably doing ok. However, I do like preventative...

Looking to tackle this, this weekend. I’ve read this thread through a number of times. Is my understanding correct:

FL 1.25B — Toyota Part #90982-08276 (NLA). If FL box and posts are still...

Pm sent

I don’t push it past 70/75mph but can sustain that for a while. And usually about 45mph up steep hills on the highway.

So I had this job performed at AAMCO in Twin Falls, ID last fall. I had my mechanic recently drain and check my tranny and transfer case to make sure everything was holding up well. He found the...

Pm sent

PM sent

I have a pair of brown swivel captains chairs to unload in Vermont. Interested parties should email shred4u@gmail.com for photos. Pick up only. Will not ship. Ideally, I want them to leave as a...

Thanks, getting right on it.

I recently had the pinion bearings replaced in the rear diff. Since I alleviated that noise, others have arisen. A noticeable "whirring" was occurring in 3rd,4th and 5th gear, consistently around...

PM'd. Also want that fog light switch if it's still up for grabs.

*Update

As I was putting things things back together, I tried jiggling the wires behind the fuse box again in hopes I could find a temporary solution while I find time and another garage to work...

Well, I like to fix things one time. So if there's a fix that can keep me from doing this again for a while, I'm all in.

I'm not to apprehensive with electrical work. I was raised to be an...

Thanks Tim,

I knew I left something out of my post in my haste to get to work.

I did try resetting the breaker in my process. But since you suggested it, and I left it out, I figured I...

I had the blower motor problem. Replaced that and the resistor. When the new blower still wasn't working on High, i repeated my "jiggle test" of the wires behind the fuse block. That seemed to be...

I went with Tim's strategy of removing the lower mount and adjusting the bushing. After that everything went back together easy peasy. Or as easily as can be hoped for considering...

I know it's...

Thanks for this thread. I used it the first time I changed my alternator and found it very useful. I'm changing out another as I had a major PS hose failure.

I ordered an AC Delco alternator...

Thanks originalkwyjibo

I don't think it's a major problem yet, but maybe a symptom. In the 40,000mi I've owned it, the oil pressure has remained fairly steady on the lower black line. It's been...

Ace,

I just have the stock dash gauges so I will be as specific as I can. I've attached a rare photo of everything running optimally for reference.

-The oil pressure, once increased, runs...

Recently, on a road trip from California to Vermont, I began experiencing higher than usual oil pressure.

I changed my oil before leaving Idaho for Cali. The van is an 89 4wd manual and has...

I'm ISO new headlights. Been thinking of an upgrade like this. How have they worked out over the last few weeks?

So I went to O'rielly and ordered up a new master cylinder. They're going to take the one I purchased a week or so ago back. But now I have to do this all over again. bummer.

After letting...

I put a new master cylinder in my '86 4wd. While me being a bit novice made this a little messy, it seemed to have been a success.

Then my brake light came on, I checked the fluid, brought it...