Search:

Slight update to this. Do not buy the JBWeld plastic bonder product, about half of the connections have failed so far. I have repairs I have done with the Henkel (Loctite) product that are still...

So turns out it was absolutely the lighter socket. Testing voltage at the socket got what I listed before at around 10.6. Testing the plug that goes into the socket 12.8. That's some massive...

Yep, got it apart, fortunately nothing needed the torch just a couple ugga duggas following the application of deep creep. Only irritating part was the replacement didn't have studs for the forward...

Thanks man, yeah it was shortly after I was looking at flex pipe that I saw there's still an aftermarket for that whole setup. Hell even a Magnaflow version, which struck me as humorous. I may opt to...

The flex pipe on the exhaust came undone on the inside, braided sheath is still intact, but definitely blowing exhaust out in there, loud as hell, and the motor stumbles I wager since the rear sensor...

Well hopefully someone with a similar year Previa can check the voltage at the lighter socket, as that's what I'm wanting to find out.

Nothing magic about it, but the assumptions are telling. I was just asking a question about the lighter socket. I've tested the alternator, battery and lighter socket, with an actual multimeter. The...

Thanks but my battery is fine, and my question is about the voltage at the cigarette lighter socket. I know there's bound to be some drop from the battery directly to the lighter socket itself, but...

As this is gonna be my new daily, I was swapping some of my gadgets over from the pickup. In plugging the voltage meter/USB charger into the cigarette lighter outlet I'm getting a read of 10.6v while...

In attempts to remedy some engineering oversights in the Previa, and fix things that were broken on my "new" van, the wipers were an immediate sore spot. The passenger side sprayer was inactive. I...

Sorry if this has been discussed already, I searched around though and didn't find anything. I'm wondering though if a conversion to disc brakes in the rear is possible.

If so would it be a...

Thanks Gwen, I'll keep that in mind for future posts. New to this forum, but I'm catching on =)

Hey all, I didn't see anything mentioned about this stuff, but it's worked well for me on other vehicles, and this afternoon solved several issues on the previa. The first was that the locks weren't...

While it's not finished I thought I'd give this a post. I've done several similar repairs on other vehicles all with good success.

I've seen some videos posted about using longer screws, deck...

I've seen some posts where people have increased their spring rate in the rear by using 64-66 mustang springs. The only info I've found though are people using fixed rate springs. I was wondering if...

Just wondering as having a discord server is nice.