Passenger front cv axle? And main fuse panel. The one under the passenger side dash
Passenger front cv axle? And main fuse panel. The one under the passenger side dash
Can you send me a picture of the pigtail for the 1st o2 sensor?
To be totally honest, that piece is beyond my skillset and toolset atm. I'll keep that piece in mind for when I'm doing the final teardown before I send her off to the scrapper but it's not anything I'll be able to snag anytime soon, sorry.
That piece has already been pulled and is pending sale. If the buyer backs out for whatever reason I'll shoot you a PM to see if you're still interested.
Hi there. I would be interested in the passenger side rear view mirror and the taillights. Specifically the wiring harnesses for the lights. My van was stolen by junkies and they broke the mirror and ripped off those harnesses. Jerks.
Let me know. Thanks
PM sent!
Alright guys, the plan as it stands now is to dismantle the van down to basically a shell during the first two weeks in April and then the shell is going off to the crusher. Tons of good parts have found new homes but nearly the rest of the van is still available to be pieced out, just ask!
dash.jpg
What the dash looks like now.
distributorandignitor.jpg
Igniter and distributor, pulled and ready for sale!
relaysandswitches.jpg
Switches and relays!
Everything in the photos is for sale, PM or reply to the thread if you're interested.
Do you possibly still have the radiator cap housing? It's listed as the 'water outlet' in Toyota parts-ese. (The thing the cap and temp sensors attach to). Lemme know, thank you!
Upper control arms any good? also can the ice box be installed on a 87 cargo? might be cool to have.
To get the ice box functional on a cargo van requires also installing additional A/C plumbing parts that are at this point NLA. Then you would need to secure the wire harnesses for the electrical support. The electrical connections differ from 87 to 89 I found this out when trying to install an Ice box from an 87 into an 89 Van. I was trying to replace my old ice maker in my 89 with one from an 87 and the darn connectors were different. I would have had to cut and splice and did not want to compromise a working electrical system.
The A/C system has to be evacuated of Freon and recharged as it is integral to the A/C system. If you have the old R-12 you will also be forced into upgrading to R-134a.
If you want it for looks you just need to bolt it to the floor
PMs sent!
hey has your sliding door handle been claimed?! if not i would love it!
also looking for a full rear end or maybe just the differential too!
Sliding door handle is long gone, sorry. The differential however I still have, but it's for a 4x4, is that going to matter?
PM sent
Do you have the plastic hood hanger (or whatever you call that holds the engine compartment open?)
Hi, I am trying to bring my a/c and heater back alive but my interior is gutted. My old a/c cable assemble desentigrated. Is there anyway you could salvage that for me. Actually I'm interested in the whole dash board, speedometer, clove compartment the the whole deal. I'm in Las Vegas email is digitalgsmp@gmail.com. hope this thread isn't dead, I could use some help. I love this van dispute the poor condition. Once I have a/c and it's road worthy the plan is to really trick it out.
I need a new lock core for the tailgate and sliding door. Do you have either?
You just need the cores, not any of the convoluted mumbo jumbo that attaches to it? I'll be out at the van today and see what I can do but those pieces are both available.