Greetings !
Don't know why after spending a day and half getting ready for a road trip a good portion of that loading food, camp gear, bicycle, gear, tools more food and gear I take off and as fate would have it my check engine light wasn't going off with restart or when I rolled around the the corner or whatever as it has for the last 30+K but staring me straight in the face- with 30 plus hours of driving in the great wide open before me it seemed uncomfortably bright.

With the great help of this forum I was able to track down a broken wire at the harness CONNECTOR to computer. It is the "T" wire as shown in the thread photo and diagram which is broken at where in connects to in this case the grey plug housing. The wire that is broken is a little bigger in diameter and has extra insulation and is solid black.
I being one to want to fix things the right way or not at all...... is there a way to get the pin out of the harness and repair it fully? If I splice the black "T" wire and the "E 1" wire,which I do not like the sounds of is there a way to so as to make further forays into the computer area look and feel as done by someone who knew what they were doing ?