I'm wondering if anyone has any secret knowledge for me or if I'm just boned. I have a 95' I bought cheap and am fixing all the little bits and making it nice, found the sliding door window was torn from the door at the upper fastener. It had torn a hole in the sheet metal and the screw on the window as well as the nut behind the sheet metal had been torn through. I cut a plate to fender it into place, but when i started turning the nut, the bolt shaft broke free from the window and now spins free. This is killing me. I'm going to put a bumper in the window in hopes it stops the rattle...

Am I just screwed and up for a pick and pull new door?