I usually hang out in the Yahoo Previa group where last year a member got Addco to agree to do a run of now-discontinued Previa rear sway bars for the wholesale unit cost of $140 IF we could commit to a quantity of 10. We commited, but... they didn't follow through. I contacted them again this year and was assured it would really happen now if the quantity=10 commitment was there. Not saying I believe they'll do it this time either, but at this point we only have 5 interested (in the Yahoo Group), so I thought I'd gauge any interest here as well. IF there is interest in a minimum of 5 more, I'll take the lead to get some real commitment on Addco's part, like an actual written purchase agreement, etc. Supposedly this makes a huge difference in handling, especially cornering and evasive maneuvers ("Serpentine, Shel, serpentine!").

On the Addco.net site there's a chart for Toyotas that references a 1" bar, stock # 472 and a #018 Endlink Kit.
http://www.addco.net/aftermarket/catalog/toyota/

Then, there's a bare-bones installation document for it under the "400" series
https://addco.s3.amazonaws.com/wp-co...012/03/472.pdf

I image you have to drill holes to mount the end-link bracket and be fastidious about installation in terms of making sure the wheels & axles are positioned at normal ride height and the bar maintains a respectful distance from the exhaust. Someone'll do it and post some better instructions I'm sure.

SO, add a comment or PM if this is something you'd be interested in. Otherwise we all keep swingin' and swayin' I guess.