5 SPD SHIFTER BOX REBUILD

[MartyVanFly]

I have an 86' 5spd 2wd and am in the progress of doing an (possibly the first) EV conversion on my van. I'll be using a clutch, as my wife would like to drive and a clutch is a good safety piece for EV conversions. So keeping the 5spd, I need to rebuild it. Everything is loose and the spring is twisted and skewed.

Does anyone have part numbers? I used to have an 87' Mr2 and the shifter box is nearly identical.

Could I use this? MR2 rebuild. Not against using non-oem as long as the aesthetic and looks aren't too off from stock.

I've gone so far as to automate the shifter with positional linear actuators and a controller... but a slick rebuild shifter would look much better and work... just work. Could a k20 RSX shifter box work? Open to any and all ideas.

Thanks in advance,

Christopher

van and mR2 shifter box images attached