After waiting a couple weeks, I got the air intake tube in the mail.

I installed it and drove around a bit and it seems to be having the same issues.

Quote Originally Posted by Burntboot View Post
So you have replaced the o2, did you erase codes and recheck to see if anything else has popped up?
If you're still having an o2 fault (after clearing the stored codes) show up, then you will want to check the wiring for continuity between the o2 plug and the ECU.
There have been a couple of ECU replacements, but I would want to do the proper diagnosing before pulling that trigger.
BB
After clearing the codes, there don't seem to be any error codes. It is blinking on for a second followed by off for about 5 seconds than on for a second then off for 5 seconds.