Results 1 to 20 of 40

Thread: Blower (cabin heat) motor issues

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Van Obsessed
    My Van(s):
    1988 4WD LE auto dual range t-case (the mistress) 1988 4WD LE auto(the donut van)
    Join Date
    Aug 2012
    Location
    Tacoma, Wa
    Posts
    810
    Rep Power
    1

    Re: Blower (cabin heat) motor issues

    Rockauto has a couple listed. I recently picked up a couple Toyota resistors on Amazon.

  2. #2
    Van Fan
    My Van(s):
    1988 Master Ace Surf 4wd
    Join Date
    Jan 2018
    Location
    Northern California
    Posts
    63
    Rep Power
    1

    Re: Blower (cabin heat) motor issues

    Glad I found this thread! Ever since I got my van the two low speed blower settings didn't work. Just installed a new resistor and they work perfectly now! Love it when a fix is easy. Thanks TVT!

  3. #3
    Van Fan
    My Van(s):
    Toyota Van 1984 2wd
    Join Date
    Sep 2018
    Location
    Los Angeles
    Posts
    84
    Rep Power
    1

    Re: Blower (cabin heat) motor issues

    Hello everyone!


    I'm trying to fix my front heater for my '84 Van. I did all the repairs below the air from my heater is still not working, any suggestions?

    I would like to mention I have the van for almost 2 years without front/rear heater and the old owner had a loop hose, so it wasn't connected to the heater at all. (I have connected the hoses with the heater).
    Name:  7A.jpg
Views: 850
Size:  89.2 KB

    1. I tested my heater relays with my drill’s battery and a multimeter and I got 00.3 continuity. (I followed this tutorial)
    https://www.youtube.com/watch?v=ire7vyDqelg

    2. I replaced my resistor and motor with new ones. (both were in a bad shape)
    Name:  1A.jpg
Views: 770
Size:  99.8 KB
    Name:  2A.jpg
Views: 817
Size:  100.0 KB

    3. I replaced my bad old fuse box and 3 bad connections with clean ones.
    Name:  3A.jpg
Views: 784
Size:  97.1 KB
    Name:  4A.jpg
Views: 722
Size:  88.4 KB

    4. Tested my heater blower switcher and it gave me continuity.
    5. I tested my Circuit Breaker and it gave me 00.3 continuity. I tried to reset it but I'm not sure if I did anything, I can't tell . Is it like pushing a button?

    6. After trying everything above, I bought from Toyota dealership 2 30A and the 80A Fuses and replaced them in my Fusible Link.
    Name:  5A.jpg
Views: 830
Size:  91.1 KB

    Something else I have noticed under my van’s steering wheel, I have 2 relays and the diagram has 3 relays. But I have asked other Van owner and some of them have 2 relays as well.
    Name:  6A.jpg
Views: 823
Size:  90.2 KB

    Also I have this guy is not plugged anywhere, what is it?
    Name:  new.jpg
Views: 771
Size:  83.1 KB

    Thank you very much!
    Last edited by iq_artwork; 10-14-2020 at 07:55 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •