-
Forum Newbie
- Rep Power
- 1
Ignition
Idle fluctuating intermitentally ...
86Vacuum leak?
-
Van Enthusiast
- Rep Power
- 1
Re: Ignition
If you are checking for vacuum leaks, you might as well check the idle signal of the throttle position sensor. You do not have to remove it to test if it sort of works. Connect a multimeter to the middle and idle pin, and have it test for resistance. It should switch between open and closed when you slightly move the throttle.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules