There is no content in this section
SWEET!!! After much trials and tribulations my 84 Toyota Van Wagon LE 5 speed is running perfectly! 133 miles so far since the rebuild. Leaving the fuel pump jumper wire in place was the...
ClydesdaleKevin 05-16-2024, 09:35 AMOh that is very frustrating. I hope someone here knows what the issue is.
But if I look at this from a purely logical perspective.
You think the injectors caused hydrolock, which bent the...
There are good tips in this thread for things to check. The PCV grommet is a good one to check, I recommend putting some plumbers grease on the new grommet to help slide it on. Another area is the...
Ian R. 05-15-2024, 10:18 PMHi Everybody,
Here is the update of the Denso Pump rebuild and installation. Got pump installed and bled injector lines and inspected everything inspectable and fired it up. I left the big shroud...
Re: Bent pushrod dillema!!!
Since it is an 84, have you checked your idler arm/center arm for play on the bushings/ball joint?
Jan-Willem 05-16-2024, 03:08 PM