You can remove the glove box with 2 small screws on the hinges, then unbolt the support bar for it, to gain better access to the fuse panel. The panel is held in by one screw, and 2 tabs at the top, it just pulls down, then you have some access to it. The problem I had just recently with the wiper circuit was in the panel itself. and I had to make up a jumper to 'go around' the wiper fuse. Auto electric is not my strong point, I'm just trying to keep it on the road for another year. The wipers have to work in NY to pass inspection, and 'Scooby' is due next month.