I have a 1987 van 4wd AT. A couple days ago, the 1.25B fusible link burnt for some unknown reason. I am currently in Mexico so very hard to find a replacement (or anything that would temporarly replace this until i get back to the U.S). I built a new one with a local mecanic. I should probably say that i bought the van with an ignition bypass (have to turn the key to run and push a momentary switch to start it) and have no idea why the owner before me did this. This makes that the starter is not connected to that 1.25B Fusible Link (but alternator is). Now that i got the "new" fusible link in, i noticed that one of the wires (green one. Not the white with blue line one.) gets suuuuuper hot when the van is running. Any idea why and what is causing this? I'm planning on starting my journey up north and dont want the fusible link to keep burning every once in a while... I have pictures but can't seem to understand how to put them on here